Top Stories


NHTSA reported 51 million U.S. vehicles were recalled during 2015, and on average 25 percent of all recalled vehicles are not repaired.

51 Million U.S. Vehicles Recalled in 2015

"Millions of vehicles are recalled every year. Old, new, used, or leased – one of those recalled vehicles could be yours," NHTSA Administrator Mark Rosekind said. "Check your VIN – Safe Cars Save Lives."

L&I Fines Phillips 66 Refinery $324,000 for Unabated Hazards

The 2014 citations are under appeal to the Board of Industrial Insurance Appeals, but state law requires employers to correct hazards even if the violations are under appeal unless a "stay of abatement" is granted, and the energy company's stay of abatement request was denied by the board.

Increased Enforcement Leads to FRA's Highest-Ever Penalty Collection Rate

In an effort to increase overall rail safety, enforcement has been stepped-up.



The explosion in West, Texas, prompted President Obama

CSB's West Recommendations Coming Jan. 28

The safety board has a public meeting scheduled from 6-9 p.m. in Waco, Texas, near the explosion site.

Pan American Health Organization Stresses Zika Surveillance, CDC Issues New Guidelines

The Zika virus is now circulating in 18 countries and territories of Latin America and the Caribbean, causing the Pan American Health Organization to recommend that its 35 member countries monitor and report any increase in neurological syndromes and congenital anomalies.

Canadian Government Ends Conditional Pesticide Registrations

Conditional registrations have been granted when scientific review determines the risks of a pesticide are acceptable but additional confirming data are required. Conditional registrations don't undergo a public consultation until the registration is amended, renewed, or converted to a full registration.

Border agents in Scotland have confiscated more than 15,000 hoverboards that have been tested and found to be unsafe, authorities said Dec. 3.

CPSC Chairman Sounds the Alarm on Hoverboards

Chairman Elliot F. Kaye said both UL and ASTM International are preparing to work on the development of standards for hoverboards that would seek to address both types of hazards, and he will direct CPSC staff to participate in the standards' development.

ECHA Finds 22 Labs Ready for One-Generation Reproductive Toxicity Studies

ECHA performed a similar study in 2012 and now reports that global laboratory capacity to conduct the studies has increased. The latest study was triggered by the recent change in the REACH information requirements.

Multiple Violations Assessed Against Food Packaging Provider

OSHA has cited Genpak for failing to implement specific procedures to prevent machinery from starting up during maintenance and servicing and also for exposing workers to fall hazards from unguarded platforms.

The proposed rule would replace the current three-tier system of "satisfactory-conditional-unsatisfactory" for federally regulated commercial motor carriers with a single determination of "unfit."

FMCSA Proposes Rule to Focus on Higher-Risk Motor Carriers

"This update to our methodology will help the agency focus on carriers with a higher crash risk," said FMCSA Acting Administrator Scott Darling. "Carriers that we identify as unfit to operate will be removed from our roadways until they improve."

WHO Renews Warning on Counterfeit Meds

"They can be found in illegal street markets, via unregulated websites through to pharmacies, clinics, and hospitals" and are difficult to detect because they are frequently designed to appear identical to the genuine product and may not cause an obvious adverse reaction, according to the updated WHO fact sheet.

FHWA is seeking input in eraly 2016 on improving the ability to view content in the 862-page MUTCD and developing a structure to make it easier to use.

Highways Agency Seeks Input on Modernizing MUTCD

FHWA is seeking input by Feb. 18 on improving users' ability to view content in the 862-page MUTCD and developing a structure to make it easier to use.

Foundation's Report Evaluates 2.5-Inch Connections' Actual Flow

The Technical Committee for NFPA 14 added the requirement for one 2.5-inch inlet per every 250 gallons per minute (gpm) in 2007, "but this requirement lacks supporting scientific documentation, so there was a need to conduct flow testing to determine the amount of water that is possible to flow into an FDC inlet," according to NFPA.

OSHA to Improve Outreach Trainer and Student Cards

OSHA is introducing more durable and secure completion cards for its Outreach Training Program.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars