Top Stories


WHO Updates HCV Treatment Guidelines

The updated guidelines are intended to promote the scale-up of HCV treatment, particularly in low- and middle-income countries where few people currently have access to hepatitis treatment.

Peabody Energy Files Chapter 11 Bankruptcy for U.S. Operations

"A company like Peabody with safe, efficient operations will be well positioned to serve coal demand that will continue in the United States and around the world," said Peabody President and CEO Glenn Kellow.

Roofing Contractor Exposed Workers to Dangerous Falls Five Times in One Year: OSHA

OSHA has proposed $280,000 in fines against the Kennesaw, Ga.-based company.



As the 2016 heat season approaches, Cal/OSHA leaders urged stakeholders April 11 to take precautions and protect outdoor workers against heat-related illnesses, or worse.

Take Heat Precautions, Cal/OSHA Urges

"Employers at outdoor work sites must know the steps to take to prevent heat illness injuries on the job," Cal/OSHA Chief Juliann Sum said. Cal/OSHA conducts inspections at outdoor work sites in industries such as agriculture, landscaping, and construction during heat season.

OSHA's Reminding Industry of Offshore Jurisdiction

The agency covers safety and health conditions not specifically covered by the U.S. Coast Guard on all vessels within three nautical miles of shore.

Tank Cleaner Fined $226,310 After Worker's Death in Confined Space

This is the fourth time Dedicated TCS LLC failed to address dangerous confined space hazards, according to OSHA.

OSHA: Worker Died from Exposure to Manure Gas

W.E. Soil Enhancement has been cited for serious safety violations as a result.

Contractor Sentenced in UK Trench Fatality

The HSE investigators found the work was not planned appropriately, with insufficient risk assessment and workers not appropriately trained or equipped to perform the work or prevent the collapse.

In 2014, 669 fatalities occurred in highway work zones -- a slight increase over the previous year. While work zone fatalities are about half of what they were 15 years ago, there is still more work to be done, FHWA Deputy Administrator David Kim said.

2016 National Work Zone Awareness Week Under Way

"As spring advances and warm weather allows highway roadwork to resume after the winter, we must remember that the lives of highway workers are often in our hands," FHWA Deputy Administrator David Kim wrote as he urged Americans to travel safely through work zones.

Most at risk are outdoor workers, including agricultural workers, commercial fishermen, construction workers, transportation workers, and first responders, but workers in hot indoor environments such as warehouses and factories are also at risk of heat illnesses.

Report Assesses Climate Change's Impacts on Workers

Most at risk are outdoor workers, including agricultural workers, commercial fishermen, construction workers, transportation workers, and first responders, but workers in hot indoor environments such as warehouses and factories are also at risk of heat illnesses.

NFPA Electrical Code Second Draft Report Available

The deadline to submit a Notice of Intent to Make a Motion on the Second Draft Report for NFPA 70, the National Electrical Code®, is April 29.

Coast Guard Seeking Boating Safety Council Members

The National Boating Safety Advisory Council advises the U.S. Coast Guard on recreational boating safety regulations and other major boating safety matters.

USGS Says Alaska a Hot Spot for Avian Influenza to Enter North America

While no highly pathogenic avian influenza viruses have been found in Alaska, the state is an important area to monitor because of migratory bird flyways from North America and Eurasia that overlap it.

Fall Hazards Cited Again Against NJ Contractor

The inspections involved in the new case took place at four sites in Middletown, Del., and Limerick and Perkasie, Pa. Berlin Builders is based in Cinaminson, N.J., according to OSHA, which has cited it for two willful, nine repeat, eight serious, and one other-than-serious violations.

"The progress we made in 2015 is good news for miners and the mining industry. It is the result of intensive efforts by MSHA and its stakeholders that have led to mine site compliance improvements, a reduction of chronic violators, historic low levels of respirable coal dust and silica, and a record low number of mining deaths," said Assistant Secretary Joseph A. Main.

2015 Safest Year Yet for U.S. Mining

Preliminary data released by the Mine Safety and Health Administration confirm that 2015 was the safest year in U.S. mining history, both in the number of deaths and mining's fatal and injury rates.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

Featured

Artificial Intelligence

Webinars