Top Stories


Statoil Grounds Helicopters After Crash

At least 11 people aboard died in the April 29 crash of a helicopter coming from the Gullfaks B field in the Norwegian North Sea.

OSHA Occupational Safety and Health Committee Schedules Fourth Emergency Response Meeting

The meeting is for the Emergency Response and Preparedness Subcommittee.

OSHA Finds Multiple Hazards After Battery Manufacturer's Worker Loses Part of a Finger

Exide Technologies also received an alert letter for a lack of heat-stress program.



FRA Makes $25 Million Available for Infrastructure Upgrades

The Obama administration has also requested $2.3 billion in the FY2017 budget.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

American Coatings Association Pushing for TSCA Reform Bills

ACA has supported two bills: the Frank R. Lautenberg Chemical Safety for the 21st Century Act, S. 697, which passed the U.S. Senate on Dec. 17, 2015, and a House of Representatives bill, H.R. 2576, which passed June 23, 2015, on a 398-1 vote.

OSHA Cites Berlin Builders Inc. Again for Fall Violations

Nicholas DeJesse, director of the agency's Philadelphia Area Office, said "A developer and contractor that hire this company are truly rolling the dice on worker safety. Amid the hazards we have cited, two Berlin Builders' employees suffered falls in 2015. This employer must make immediate changes before something worse happens."

Convenience Store Where Employed Died in Robbery Cited for Lack of Safety Protections

One willful citation was issued to Jay Management Inc.

Manufacturing Company Cited for Amputation Hazards

Lynar Corp. faces $54,000 in fines.

L&I Honors 84 at Worker's Memorial Day Ceremony

The agency reports that recent data shows construction, agriculture, logging, and jobs that require driving are among the most hazardous jobs for Washington workers, and that falls continue to be a leading cause of workers' deaths. Six work-related deaths in 2015 were homicides.

"It was quite startling to see" the 2014 increase in the U.S. fatality rate for workers 55 and older, with 1,691 occupational deaths in this group, AFL-CIO Director of Safety and Health Peg Seminario said in April 2016.

Older Workers' Risks Highlighted in AFL-CIO's 2016 Report

Other high-risk work groups cited in the report are oil and gas extraction workers (144 deaths in 2014), health care workers who may face workplace violence hazards (765 occupational fatalities in 2014 were attributed to workplace violence), and Latino workers (804 deaths in 2014 and a fatality rate of 3.7 per 100,000 workers).

DOT Agencies Hosting Three Meetings on Sleep Apnea

The public listening sessions will begin May 12 in Washington, D.C., before moving to Chicago and Los Angeles. Stakeholders also may submit written comments until June 8.

NSC Says Workplaces Have Highest Number of Unintentional Deaths Since 2008

The agency has called for a renewed dedication to occupational safety.

Mitsubishi Motors Admits to Running False Mileage Tests Since 1991

An internal investigation discovered the tampering.

DOT May Issue Rule Mandating Annual Inspections of Passenger-Carrying Commercial Vehicles

FMCSA must assess: the risks associated with improperly maintained or inspected CMVs designed or used to transport passengers; the effectiveness of existing federal inspection standards in mitigating the risks associated with improperly maintained vehicles and ensuring safe and proper operation; and the costs and benefits of a mandatory inspection program.

ERG2016 Now Available

PHMSA will distribute more than 1.5 million free copies of the guidebook to firefighters, emergency medical technicians, and law enforcement officers nationwide -- the goal is to have one in every public service vehicle across the country.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence