Top Stories


First and foremost, we want the protective clothing to help prevent injuries to our workers and keep them safe. Second, we also want to improve morale and worker productivity.

Impact: Developing an Attitude for Safety

If workers are overly optimistic that no injuries will befall them, they may be more likely to take risks that could end up in injuries.

FAA Administrator Talks Safety at AirVenture

Michael Huerta discussed the importance of collaboration in Oshkosh, Wis.

Blue Bell Agrees to Follow Recognized Industry Standards

The standards to be followed are Sanitation Standard Operating Procedures (SSOPs); Good Manufacturing Practices (GMPs); a Pathogen Monitoring Program (PMP) for Lm that includes environmental, ingredient, and finished product testing; and a Hazard Analysis and Critical Control Points (HACCP) plan and/or a written Food Safety Plan.



Houston Contractor Violates Trench Requirements for Sixth Time in 10 Years

Oscar Renda Contracting faces $124K in OSHA penalties.

Tufts’ Patrick Collins reported that the early results "raise the possibility of optimizing patient-specific treatments" and show that using thread is a more flexible and less expensive option than substrates for implantable devices.

'Smart' Thread Collects Real-Time Diagnostic Data

Tufts University engineers headed a research team that integrated nano-sized sensors and electronics into simple threads.

NBA Players Association to Pay Health Insurance for Retired Players

The program is the first of its kind among North American professional sports.

Red Cross Receives Grant for Community Fire Training in 15 States

ARC has received a $1.066 million AmeriCorps grant from the Corporation for National and Community Service to support AmeriCorps members to help the Red Cross teach children and adults in 15 states about home fire safety and being prepared for emergencies.

Adhesive Tape Manufacturer Exposed Workers to Electrical, Fire, Chemical Hazards

Scapa North America has been cited for 17 violations.

Seattle Marine Terminal Operator Fined $448,200

Seattle Bulk Shipping Inc. is currently appealing violations for which it was fined $424,850 and is considered a severe violator by L&I, meaning it is subject to follow-up inspections to determine whether the conditions still exist.

Florida Agency Screening Donated Blood for Zika

OneBlood, which collects blood donations across most of Florida, announced that, effective July 29, it will begin testing 100 percent of its collections for the Zika virus using an investigational donor screening test.

Final Rule Requires Transit Agencies to Maintain Capital Assets

Grantees will have to develop plants for assets, including vehicles, facilities, equipment, and infrastructure. In 2013, FTA says, the transit industry deferred maintenance needs to a tune of $86 billion, representing more than 12 percent of total assets nationwide.

DoD Opens Second Innovation Hub

U.S. Defense Secretary Ash Carter christened the facility in Boston this week after opening the first one last year in Silicon Valley, Calif.

BSEE says the subsea bolt failures are a recurring problem that raises serious safety and environmental concerns. (BSEE photo)

BSEE Forms Interagency Group on Subsea Bolt Failures

The agency's director says they present a major risk for offshore workers and the environment. Many provisions of BSEE's Well Control Rule are set to take effect July 28.

OSHA Cites Pilgrim's Pride for Medical Mismanagement and Other Safety Hazards

The chicken producer was also cited for fall and machine guarding hazards.

Wage and Hour Division Enters Alliance with NYS Workers' Compensation Board

The alliance will better protect workers for an initial three-year term.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

Featured

Artificial Intelligence

Webinars