Top Stories


New FRA Directive Targets DOT-111 Cars' Weld Defects

"The good news is these flawed welds have been found in only a small portion of the U.S. tank car fleet that were manufactured by American Railcar Industries and ACF Industries between 2009 and 2015," FRA stated.

Sources of chemical pollutants come from five main categories: products used in the building, products that can get pulled into the HVAC system from outside the building, accidental spills, products used during construction activities, and byproducts of combustion such as carbon monoxide, formaldehyde, and nitrogen dioxide.

Basics of Indoor Air Quality in the Workplace

OSHA suggests that a proactive approach be taken to address IAQ concerns. Failure to respond expeditiously and effectively to IAQ concerns can quickly lead to more numerous or serious adverse health issues.

You also might want to consider having your ducts cleaned, or at least inspected. If they contain mold, dirt or vermin, increasing the airflow through them actually might exacerbate your sick building problem.

Sick Building Syndrome: What It Is and Tips for Prevention

Telltale clues include increased absenteeism, a large number of occupants complaining about vague but similar symptoms, and a common history of symptom resolution when people are not in the building.



Foot fractures account for about 10 percent of all broken bone injuries that are reported in the United States. Foot fractures are frequently caused by jumping or falling from height, a dropped object, or a crushing impact.

Putting Our Best-Protected Feet Forward

OSHA cited a Lancaster, Pa., landscaping business on Jan. 29. The company had notified OSHA that an employee suffered a double toe amputation when he lost control of a lawn mower he was operating on a wet, grassy slope.

This is an artist

Our Anaheim Excursion

Get ready for 2016's biggest U.S. safety show by viewing dozens of the new products exhibitors will be displaying.

In addition to selecting HPDs and documenting the PAR achieved by each worker, hearing protector fit testing is a critical component to worker training. (Photo courtesy of 3M Personal Safety Division)

Selecting Hearing Protectors—It's the Fit That Counts

In addition to selecting HPDs and documenting the PAR achieved by each worker, hearing protector fit testing is a critical component to worker training.

Protecting Our Future: Young Worker Safety on the Job

Encourage young workers to ask questions about tasks or procedures that are unclear or not understood.

Preferably, have an outsider perform the audit or someone who is somewhat familiar with your program and can ask questions that may cause you to have to think—why do we do it this way?

How to Maintain a Drug-Free Workplace and Ensure Audit Success

Our drug-free workplace program should also get a checkup every year. Laws and regulations may have changed, and the company may need to adjust its policies and procedures.

A critical analysis shows that fork trucks are used in manufacturing cells and areas of distribution centers when far less machinery is needed to move product from point A to point B. (Magline photo)

Fork Truck Free and New Materials Handling Innovations

The ergonomic answer to moving heavy items without a fork truck, this innovative approach is designed for ease of use, higher productivity, and keeping workers on the job and free from injuries.

The bottom line is that MSDs affect workers in almost every occupation and industry in the nation and in workplaces of all sizes.

Creating an Effective Ergonomics Program

With the right assessment, training, management support, and processes in place, you can proactively identify and eliminate ergonomic issues before they result in debilitating injuries.

For much longer than many people realize, employee engagement has been the driving factor in not only safety, but performance in general.

Safety Incentive and Reward Programs Can Help Increase Work Safety

Ultimately, one of the keys to ensuring job satisfaction and happiness in the workplace is by celebrating your employees’ achievements.

The most effective way to manage noise exposures in the workplace is always by the elimination or removal of the sources that contribute the most to the overall noise exposures. Some processes are inherently noisy, however. (Cirrus Research plc photo)

Proven Methods for Reducing Noise Exposures

Noise dosimetry may be necessary if the workplace noise levels vary throughout the day or if the workers are mobile, driving vehicles, or working in areas where it is either unsafe or impractical for a sound level meter to be used.

Ohio BWC Grants Fund OSH Research Projects

Grants to Ohio State University include $249,882 for research on firefighters' occupational exposures and cancer risk and also $249,993 on preventing firefighter injuries from handling obese patients.

You will at times be amazed at how little the employee knows about why they must wear the hearing protection and other fundamentals of the program.

Can You Hear the Training Now?

There is no correct, best, or worst training effort. The main things to remember are consistency and repetition. Any information has to be repeated in order for us to actually remember and put it to use.

When a defibrillator has shocked the patient, it’s important that the emergency services are called, even if the heart

Your Heart: The Differences Between Sudden Cardiac Arrest and a Heart Attack

Eating healthy, regularly exercising, and generally looking after the body are the best ways to reduce your chances of suffering a heart attack or an SCA.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

Featured

Artificial Intelligence