Top Stories


The fabric and fabric system needs in diverse climates can be very different. Workers in cold, northern climates may need insulated products for their daily work, whereas southern climates may dictate a single layer. (Westex by Milliken photo)

Beyond Compliance: Specifying Reliable Flame Resistant Workwear

Know what you are truly buying: The AR/FR fabric in workwear is the single largest factor in determining the garment's protection level, comfort, and overall value.

Workers recognize what a good fit feels like and sounds like. (Honeywell Safety Products photo)

Ear Plug Selection and Fitting Best Practices

Fit-testing of hearing protection now allows a worker to try various hearing protectors to determine which type is most suitable.

OSHA

Staying on Top of Hazmat Training Requirements

The key standard for working with hazardous chemicals is 29 CFR 1910.1200, the revised Hazard Communication Standard, which has been aligned with the Globally Harmonized System of Classification and Labeling of Chemicals.



Is there anything we can do to get the correct responses from the workers and save more lives?

Fire Alarm or Test?

Let's work on designing and conducting tests and drills so that alarms are for emergencies and the employees respond in a safe and proper manner.

Qualified vs. Non-Qualified

This topic is still one of the most frequent questions I receive while traveling the country speaking on NFPA 70E and Electrical Safety. Since the 2004 NFPA 70E, we began to see employers emphasizing adherence to the requirements of the 70E standard.

OSHA Revises Requirements for Outreach Training Program Instructors

Revised requirements will go into effect on April 1, 2017.

WHO Publishes First List of Bacteria Where New Antibiotics 'Urgently Needed'

"Antibiotic resistance is growing, and we are fast running out of treatment options. If we leave it to market forces alone, the new antibiotics we most urgently need are not going to be developed in time," said Dr. Marie-Paule Kieny, WHO's assistant director-general for Health Systems and Innovation.

OSHA Renews Partnership with Alllied Construction Industries

The trade association represents more than 500 companies.

IEEE, American Welding Society Searching for New Executive Directors

Both of these large organizations announced last week that their current EDs have decided to retire soon.

ASTM F23 Committee Agrees to Remove ASTM F2302

The ASTM F2302 standard, Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant, has been withdrawn until such a time as the standard could ensure no unsafe products would meet minimum requirements. However, Mary Mikolajewski, staff manager for Committee F23, said the standard was administratively withdrawn.

WISHA Touts New Safety Apps

"We hope all employers will give these apps a try," said Jenifer Jellison, program manager for the SHIP grant program. "They're convenient, easy to use in the workplace, and offer a great new way to prevent injuries and reinforce safe work practices."

Congress Moving Bill to Repeal 2016 Recordkeeping Rule

The hearing is scheduled to start at 5 p.m. Eastern time Feb. 27 and will concern H.J. Res 83 to disapprove the OSHA rule and also H.R. 998, called the SCRUB Act.

Oregon OSHA Adopting Pesticide Rules

The agency will re-convene its Small Agricultural Employer Advisory Committee this year to further review how to best protect farm labor housing occupants from pesticides.

Bill Filed to Create Texas Amber Alerts for Chemical Emergencies

An example of an incident where the alerts could have assisted the public was the methyl mercaptan gas release that killed three operators and a shift supervisor at the DuPont La Porte, Texas, facility on Nov. 15, 2014.

Sheriff's Deputy Wins 2017 Hearing Loss Prevention Award

The 2017 Safe-in-Sound Excellence in Hearing Loss Prevention Award™ honors those that have contributed to the prevention of noise-induced hearing loss and tinnitus through effective practices or innovations directed to those who are exposed to noise at work.

Product Showcase

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence

Webinars