Top Stories


New Chairs Announced for Z359, A10 Standards Committees

Thomas Kramer, P.E., CSP, is the new chair of the Z359 Fall Protection Committee and John Johnson, CSP, is the new chair of the A10 Safety Requirements for Construction and Demolition Operations Committee. Both will serve three-year terms that can be reaffirmed for longer periods of service by the committees.

DOT Inspector General Auditing Controls of FAA's STARS

The audit will assess FAA's identification and mitigation of security risks in STARS and determine whether its contingency planning limits the effects caused by the loss of STARS operations at large Terminal Radar Approach Control facilities during emergencies.

Resident Inspectors Chosen for New Vogtle Units

Nuclear Regulatory Commission officials in Atlanta recently announced the selection of Kenya Carrington and Patrick Heher as resident inspectors for the construction of Vogtle Units 3 and 4, new units being built near Waynesboro, Ga.



GHSA Projects 2018 Pedestrian Fatalities Highest Since 1990

A new report from the Governors Highway Safety Association projects that 6,227 pedestrian fatalities took place on U.S. roads in 2018. The projection would be the highest number of pedestrian fatalities since 1990.

L&I VPP Seminar Set for March 19

The keynote speaker is Michael Wood, CSP, administrator for Oregon OSHA and a former L&I manager, who will address the challenges of making workplace health and safety a reality through effective leadership, consistent messaging, and safety fundamentals.

It is important to remember to attempt to capture the worker

Refreshing on the Basics of Noise and Hearing Conservation

Understanding what the rules are is only half of the battle with noise. The other half is assessing noise levels and utilizing effective controls.

Although adopting Lean is ultimately something of a paradigm shift for most companies, getting started is easy. (Southland Industries photo)

Leaning into Construction Safety

Lean principles ensure everyone is on the same page from day one of a project and that each team member maintains a shared understanding of tasks, risks, goals, and procedures throughout construction.

The simple addition of a bump cap is the equivalent of a buying an insurance policy. It

One Heck of a Bump

Depending on the environment, bump caps can be customized to suit most situations.

Make sure the weight rating of the ladder you choose is greater than your weight and all of the clothes, tools, and equipment you will be wearing/carrying. (Little Giant Ladder Systems photo)

Ladder Safety Month: Ladder Safety Tips

When climbed properly, a ladder in good condition will never be the cause of the accident.

Until marijuana production, manufacturing, labeling, and distribution become standardized, use, safety, and wellness will continue to be a foggy area. (OraSure Technologies graphic)

Marijuana in the Workplace

Employers' policies should restrict marijuana use to the extent permitted by law.

Look for a headband with the level of resilience and interoperability that meets the specific application. Then, select those with lightweight design and materials to support long-time wear. (Honeywell Safety & Productivity Solutions photo)

Not Your Grandpa's Ear Muffs

Advances in passive hearing protection improve comfort, fit, and function.

It

Creating an Electrical Safety Culture: The Dangers of Complacency

Complacency can be dangerous when it comes to protecting the face and hands or properly protecting yourself from devastating electrical shock hazards.

The sixth annual National Safety Stand-Down to Prevent Falls in Construction is set for May 6-10, 2019. Falls from height cause more than one-third of U.S. construction deaths.

Far Too Many Fatal Falls

The latest BLS CFOI data showed 747 construction trades workers died in 2017, and that fatal falls were at their highest level in the 26-year history of the Census of Fatal Occupational Injuries.

Keeping clean, cool, and convenient water accessible to workers can prove to be more challenging than one would think. The use of hydration packs is a good way to not only solve for that challenge, but encourage more intake of water. (Ergodyne photo)

When Work Brings the Heat: Your Guide to Heat Stress Risks and Solutions

You can't change the weather, but you can change your approach to working in the heat.

If we can aggregate the data to change how people work, isolate them from hazards, and eventually eliminate hazards, we can tap into the full potential of connected safety. (Industrial Scientific photo)

How Much Awareness is Too Much Awareness?

We are already struggling to tread water in a sea of devices vying for our attention. When connected safety programs are properly implemented, these can be a life raft, and with some work, a speed boat to navigate these waters.

Product Showcase

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence