Articles


Women’s Bureau to Hold ‘Women in Apprenticeship: Building Our Power’ Webinar

The webinar will take place on November 17, 2022, from 4 to 5:30 p.m.

MA Roofing Contractor Cited for Fifth Citation Related to Falls in Eight Years

MA Roofing Contractor Cited for Fifth Citation Related to Falls in Eight Years

OSHA cited the company for four willful and two serious violations and proposed penalties totaling $137,196.

Staying Up to Date: How NFPA is Digitizing Codes and Standards

Episode 174

Staying Up to Date: How NFPA is Digitizing Codes and Standards

Editor Sydny Shepard sits down with NFPA LiNK Director Kyle Spencer to talk all about NFPA’s inspiration for LiNK, recent updates to the program and the future of digitization at NFPA.

The Effects of Mold on Workers and How to Keep It Out of Your Workplace

The Effects of Mold on Workers and How to Keep It Out of Your Workplace

The presence of mold at work can cause negative health effects for some workers.

Making the Right Choice: NIOSH Suggestions for Avoiding Counterfeit Respirators

Making the Right Choice: NIOSH Suggestions for Avoiding Counterfeit Respirators

When you're purchasing respirators off a website, there are important elements to be on the lookout for.

Stop the Job: Don

Episode 173

Stop the Job: Don't Risk Injury for Productivity

Encouraging employees to stop the job in an unsafe scenario comes with a long list of complications. Listen in as Editor Sydny Shepard discusses how you can encourage employees to prioritize health and safety.

Washington State Lifts COVID-19 Emergency Orders

Washington State Lifts COVID-19 Emergency Orders

Even though the emergency orders ended last week, employers should not stop protecting their workers from COVID-19.



New Report Outlines Concerns EHS and EGS Professionals Face Today

New Report Outlines Concerns EHS and EGS Professionals Face Today

A new research report from Intelex Technologies uses responses from 450 EHS and ESG professionals.

ASSP SafetyFOCUS Sessions to be Held February 2023

The sessions will take place in person and online from February 13 to 17 and online only from February 20 to 24.

MA Crouton Manufacturer Recognized with “Star” Designation

MA Crouton Manufacturer Recognized with “Star” Designation

The company was recognized following an evaluation in April 2022.

Dollar General Issued Proposed Penalties of Over $2.7M After Recent Inspections

Dollar General Issued Proposed Penalties of Over $2.7M After Recent Inspections

Since 2017, Dollar General and Dolgencorp LLC have been issued a total of $12.3 million in proposed penalties.

Why Soft Skills and DEI Matter for Professional Growth

Why Soft Skills and DEI Matter for Professional Growth

Take a look at some soft skills and how they can influence DEI in the workplace.

Enhancing Workplace Safety with the Adoption of Artificial Intelligence

Episode 172

Enhancing Workplace Safety with the Adoption of Artificial Intelligence

Artificial intelligence may sound like something from the future, but it is already changing the way companies enhance their workplace safety programs. On this episode of the podcast, Editor Sydny Shepard sits down with SparkCognition's Stephen Gold to talk about how advanced technologies can seamlessly fit in with your program today.

Vinyl Tile Manufacturer Cited After Worker Caught in Machine, Injured

Vinyl Tile Manufacturer Cited After Worker Caught in Machine, Injured

The location in Ohio has seen seven injuries since 2017 from a lack of following machine safety procedures, including the most recent incident.

How to Protect Yourself and Coworkers During Flu Season

How to Protect Yourself and Coworkers During Flu Season

With the height of flu season just around the corner, you can act now to protect yourself and others in the workplace.

The Evolution of Gas Detection

The Evolution of Gas Detection

Enhanced solutions take detection of hazardous, toxic gas to the next level.

4 Critical Layers of Flammable Fixed Gas Detection

SPONSORED

4 Critical Layers of Flammable Fixed Gas Detection

Flammable gas leaks continue to pose a real threat to workers and assets across the process industry. Gas and flame detection provide an early warning against this risk. But no single detection technology alone is 100 percent effective, which is where a layered approach comes in. By integrating the following four layers of protection, you can minimize the risk of flammable gas leaks going undetected.

Part Two: Most Common OSHA Violations & How to Avoid Them

Episode 171

Part Two: Most Common OSHA Violations & How to Avoid Them

Editor Sydny Shepard continues to count down the top five most frequently cited standards and what you can be doing to avoid being penalized for not complying with these standards.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars