Articles


The trains will be built to be fully automatic, but there will be operators aboard them when they first enter service starting in 2022, London Underground reported. (Transport for London photo)

New London Subway Trains to Be Fully Automatic

The design for 250 new trains has been selected. They'll be in service from the mid-2020s but will have an operator on board when they first enter service, Transport for London reported.

Waste Isolation Pilot Plant Closer to Resuming Operations

Final inspections of WIPP's primary waste hoist began Oct. 7, and a town hall meeting has been scheduled for Oct. 16 to update residents about the recovery process.

OSHA, FCC, NATE Holding Tower Climbing Workshop Oct. 14

The workshop will consist of two panel discussions -- the first titled "Diagnosing the Problem: Causes of High Fatality and Injury Rates" and the second titled "Implementing the Solution: Identifying and Adapting Best Practices."

Dallas Nurse's Ebola Diagnosis Raises Concern

President Obama was briefed Sunday by HHS Secretary Sylvia Burwell and ordered federal authorities to take immediate additional steps to ensure hospitals and health care providers nationwide are prepared to follow protocols should they encounter an Ebola patient.

FedEx Ground Packaging System Inc. Cited for Machine Guarding Hazard

OSHA has previously cited the company in 2010 and 2011 for similar hazards at facilities in Grove City, Ohio, and Syracuse, N.Y.

OSHA Cites Haverhill Chemicals in Fatality

The company has been placed in the Severe Violator Enforcement Program, OSHA announced.

Veolia Touts Recycling Success of Eiffel Tower Renovation

With the iconic Paris tower's first floor renovation completed, most of the coverage and commentary has focused on its new glass floor.

NTSB Presents Safety Seminar on Technically Advanced Aircraft

The seminar will be held on Saturday, November 8.



MSHA Releases Findings on Double Fatality

The findings are in regards to the double fatality at a West Virginia coal mine.

NIJ Taking Public Comments on Bomb Suit Testing Standard

Nov. 14 is the comment deadline on the draft standard, which was developed by a panel of technical experts and reviewed by an Advisory Working Group with representatives from organizations that included the National Bomb Squad Commanders Advisory Board, International Association of Chiefs of Police, DHS, and the FBI.

OSHA Publishing RFI on Updated PELs

The agency asks for comments on the 205-page request for information to be submitted within 180 days.

Stair and Cabinet Manufacturer Cited after Employee Amputation

The Newington, Connecticut, company faces fines from OSHA.

OSHA Seeking Proposals for Outreach Training Program

OSHA is looking for proposals for both the 10-hour and 30-hour online courses.

DOT Agencies, USFA Produce Best Practices Document for Crude Oil Emergencies

Their partnership has produced a reference sheet for emergency responders.

The ammonium nitrate fire and massive explosion in West, Texas, killed 15 people and injured more than 250 others in 2013. (CSB photo)

CSB Calls for Changes in Emergency Response Guidebook

The safety board said it should offer better guidance for handling ammonium nitrate fires like the one that turned deadly in West, Texas.

MSHA Chief Says Pattern of Violations Reforms Have Made Mines Safer

Assistant Secretary Joseph A. Main addressed the changes as they neared their second anniversary.

NIOSH Signs Memorandum to Advance Nanotechnology Research

NIOSH has signed the memorandum of understanding with the Colleges of Nanoscale Science and Engineering at SUNY Polytechnic Institute in Albany, N.Y.

The Arc Flash Hazard Analysis Requirements Are Not New

The Occupational Safety and Health Act of December 29, 1970, states “An Act: To assure safe and healthful working conditions for working men and women …” Section 5 of the Act titled Duties goes on to state that the employer “shall furnish to each of his employees employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees.”

The Shortage of Qualified Workers – What can be done?

Unemployment and layoff statistics continue to plague industry and are consistently making the news headlines. It may seem hard to believe but, despite national unemployment rates that often hover near double digits, many industries are experiencing worker shortages; workers who are well-trained and qualified. Some industries report that, despite an abundant labor pool, they still have positions for which they can't find qualified candidates to fill. According to a trade’s shortage survey, skilled-trade jobs, which include electricians, are the hardest jobs to fill.

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured

Artificial Intelligence