Articles


It is imperative to select only equipment that has been tested and approved to tie off at foot level or below.

Fall Protection for Iron Workers

It is imperative that you select only equipment that has been tested and approved to tie off at foot level or below.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

The Ripple Effect of Missed GHS Deadlines

How employers are experiencing the impact of the missed deadlines and what they can do to get on the right path toward full GHS compliance.

We can avoid having cosmetically enhanced pigs running about in the training department by remembering this scary truth about safety training: Trainees always learn something.

The Scary Thing About Safety Training

Safety training can make a substantive impact on employee morale when instructors take this approach.

Continuous atmospheric monitoring is always best practice. (MSA photo)

OSHA's New Confined Space Standard

It is generally agreed that this new standard was written to mirror many facets of its general industry counterpart.

We must remember to always wear our hard hats. If they are sitting at a desk, on a work bench, or in a truck, they are definitely not going to protect us.

Heads Up!

Just as important as actually wearing a hard hat when needed is making sure the hard hat fits properly. Hard hats must fit securely to provide maximum protection.

Teaching employees to handle and use each chemical safely does not require them to carry around volumes of manuals or countless handouts.

Three Hazmat Rules Every Employee Can Remember

Teach employees to get into the good habit of reading every label every time they pick up or pour from a container.

Perceived low-risk tasks typically involve the highest frequency of injury.

What Were You Thinking? The Key to Communicating More Effectively

The occurrence of experientially based at-risk behaviors driven by anticipated gains that outweigh any perceived costs is not limited to the highways or to drivers; it occurs all too often in the workplace.

Companies often send out an all-staff email if bad weather is predicted, but would employees really know what to do in a serious emergency, be it related to nature or man-made?

Plan, Prepare and Recover: How Businesses Can Manage Through Emergencies

Smaller companies often struggle, not knowing where to turn or having the budget to develop a robust business continuity plan.



Provide training in small "chunks" shortly before the time it

Adult Learning Principles for Safety Training

Your employees bring a lifetime of experiences to every training session. Sometimes they’ll know more than you do about specific hazards and safety conditions in their current jobs.

Describe what you will be protecting employees against, how you will be sure respirators are selected the right way, and options.

The More Things Change . . .

Training about a company's respiratory protection program and the uses and limitations of the respirators in use is still training, even if more delivery options are available.

The CSD can also automatically provide the first responders with the proper isolation and protective actions and safe distances necessary in the case of a spill or accident.

Hazmat Identification, Control, and Emergency Response: The Fundamental Weakness in the System

The solution includes the development and use of electronic standards and methods for automatically identifying hazardous materials and waste.

$1 Million in Grants for Mine Safety Training Available

MSHA has announced the availability of the grants, which are part of the Brookwoord-Sago mine safety grants, a program that has entered its ninth year.

Report Concludes Rare Earth Plant Complies with IAEA

The review concluded that the Malaysian government has implemented all recommendations from a 2011 study.

More than 10,000 Americans were wounded by fireworks in 2014, according to the U.S. Consumer Product Safety Commission

Handle Fireworks Safely, OSHA and CPSC Remind

A post on CPSC's blog said its most recent fireworks report showed 11 consumers were killed and more than 10,000 were injured by fireworks in 2014.

OMB Clears National Tunnel Inspection Standard Rule

DOT's regulatory agenda indicates the final rule will be published during July 2015.

Google Integrating Rail Crossing Info into Mapping Services

This means drivers and passengers can have additional cues that they are approaching a crossing, wrote Sarah Feinberg, acting Federal Railroad Administrator.

Big Senate Fight Set on TSCA Reform

Many parties are jostling for advantage as two competing bills are moving.

NTSB Investigating Alaskan Tour Plane's Crash

Nine people, including the pilot, died June 25 when the sightseeing plane crashed 25 miles from Ketchikan, Alaska.

The U.S. Forest Service plans to develop a National Sawyer Database to be used to track national sawyer certifications for those who have met the training and evaluation requirements in the use of the saws. Certifications will be recognized across the National Forest System.

Forest Service Proposes Policy on Sawyers' Training

It would allow the use of chain saws and crosscut saws on NFS lands only if the sawyer has successfully completed training and field evaluation, possesses a valid certification card, and meets any other specified qualifications to perform assigned saw work, including current first aid and CPR certification.

FAA Proposes Penalty Against National Air Cargo Group

The $77,000 penalty is for failing to comply with requirements for loading and securing heavy cargo, according to the agency.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Shower Test Cart

    The Safety Shower Test Cart speeds up and simplifies emergency shower tests, ensures you stay in compliance with OSHA regulations, and significantly reduces testing costs. With 7 unique features, the cart makes testing easy, effective, and efficient. You can test water clarity, flow, temperature, and spread—all at the same time! Most safety shower testing kits create a mess, take too much time to use, and don't fully help you stay in compliance with OSHA & ANSI standards. Transform the way you test emergency showers with Green Gobbler Safety. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence