Articles


Martin Foundry Co. Cited for Workplace Lead Exposures

A judge issued a contempt order, forcing the Kansas City, Mo., company's owner to allow an OSHA inspection.

This stock image taken in 2012 shows part of the vast crowd at a holy site in Mecca during that year

More Than 25,000 Health Workers Ready to Aid Hajj Pilgrims

"We recognize the concerns that many have regarding infectious disease in today's environment, including the Middle East respiratory disease coronavirus. However, since the onset of the disease in 2012, there have not been any cases among hajj pilgrims, and we are working to keep it that way," said Khalid Al-Falih, minister of health of Saudi Arabia.

VW Admits 'Defeat Device' Software in 11 Million Vehicles Worldwide

"Discrepancies relate to vehicles with Type EA 189 engines, involving some eleven million vehicles worldwide. A noticeable deviation between bench test results and actual road use was established solely for this type of engine. Volkswagen is working intensely to eliminate these deviations through technical measures," the company's statement says.

New Ebola Drug Advances in Development

ASPR and BARDA are working together to fund a new monoclonal antibody drug.

No Drones Allowed During Papal Visits

Three U.S. cities will create no drone zones from Sept. 22 through Sept. 27.

What Does the Farmer's Almanac Say About the Coming Winter?

Every year around this time the Farmer's Almanac and the Old Farmer's Almanac (yes, there are two of them!) release their forecasts for the coming winter.

The Cray supercomputer allows the Swiss agency to create more detailed and more frequent daily weather forecasts.

Supercomputer Advances Swiss Center's Weather Forecasts

The CS-Storm has a peak performance of up to 15 teraflops per node and uses liquid cooling, so it places no additional load on room cooling, according to Cray. MeteoSwiss, the Swiss national weather and climate service, is using it to produce up to eight daily forecasts per day.

FAA Awards $11 Million to Airports Based on Runway Incursion Risk Factors

FAA's Runway Incursion Mitigation program aims to identify and mitigate risk factors that contribute to runway incursions at specific airports; the risk factors include unclear taxiway markings, lighting, or signage and confusing taxiway layout.



OSHA Cites Pier 1 for Hazards at Two Texas Sites

The cited violations involve forklift inspections and forklift operators' training.

Malaria Death Rates Fall Sharply: WHO

According to WHO, an increasing number of countries are on the verge of eliminating malaria: 13 countries reported zero cases of the disease and six others reported fewer than 10 cases in 2014.

The proposed labeling changes are one of the steps Health Canada is taking to further minimize the risk of liver damage and improve acetaminophen safety. (Carlos Yudica/Shutterstock.com photo)

Health Canada Proposes Acetaminophen Labeling Changes

A new drug facts table would provide dosing instructions, warnings, and other safety information in a quick-reference, easy-to-read format.

OSHA Cites Refinery Contractor After Heat Exposure Fatality

JV Industrial Cos. Ltd. faces $7,000 in fines in fines, the maximum allowed for a serious violation.

MSHA and Murray Energy Reach Settlement Over 1,753 Violations

Murray will pay $3.3 million in penalties, the agency announced.

DOL and HHS Expand Employment Opportunities for People with Disabilities

The Office of Disability Employment Policy and the Administration for Community Living signed a new memorandum of agreement

OSHA Updates Fire Protection Systems Manual

The 128-page "Fire Service Features of Buildings and Fire Protection Systems" manual explains how fire personnel can resolve an incident sooner and more safely if a building’s design is tailored to meet their needs during an emergency.

OSHA requires that organizations provide training to all employees exposed to fall hazards.

Bad News in Preliminary 2014 Fatal Work Injury Data

Fatal falls, slips, and trips rose by 10 percent from the previous year. Transportation-related fatalities also increased slightly. The number of oil and gas workers who died on the job in 2014 rose from 112 in 2013 to 143 in 2014 (a 28 percent increase) and construction deaths rose by 6 percent to 874 in 2014.

Steel Company Cited for Heat-Related Illness

High Structural Erectors were cited after a worker was hospitalized.

Citations in Amputation Case Upheld

A judge has ordered American Recycling & Manufacturing Co. Inc. to pay $154K in fines.

CPWR/Duke Study Assesses COPD Causes Among Older Construction Workers

"Many workers participating in the program have experienced work-related exposures that can increase the risk of COPD," said Duke University's John Dement, who headed the study.

Companies in all industries can look to FEMA, the American Red Cross, and other local and federal organizations for information on how to begin creating an emergency preparedness plan.

Disaster Movies vs. Real Emergencies: What Can Audiences Learn?

Climate change means we'll have no shortage of freak weather events, particularly flooding of coastal areas, as we saw during Superstorm Sandy.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars