Articles


Train all workers about the hazards and about maintaining clearance from overhead power lines.

Understand the Dangers of Electrical Shock

Electricity is one of the most common causes of fires and thermal burns in homes and workplaces.

Mindfulness: Moving Beyond Trends Toward Performance

Leaders can help build a more mindful workforce.

Like bloodborne pathogens, hazardous chemicals can be present throughout a health care facility. Although it takes time to check each department, room, and closet, it really is one of the most effective ways to find materials that may otherwise be missed.

Health Care Hazmats: There's More On Site Than Just Bloodborne Pathogens

Sanitizing, disinfecting, and cleaning chemicals are likely to be found throughout the facility. It is important to know the particular brands and styles that are being used to verify that proper precautions are being taken.

Once a fabric has been manufactured, it should be inspected and tested for quality assurance and to ensure that the fabric meets or exceeds the ASTM and NFPA standards for flame resistance. (Mount Vernon FR photo)

Vertical Manufacturing of Flame-Resistant Cotton and Cotton-Rich Fabrics

Wear trials can help guide you in selecting the right fabric by providing a more comprehensive evaluation of important factors such as performance, comfort, and applicability.

The primary objective of outerwear in cold weather is to provide warmth. However, sub-zero work have the potential for exposure to an electric arc or a flash fire event.

How to Stay Safe and Stay Warm This Winter

The primary objective of outerwear in cold weather is to provide warmth. However, many sub-zero temperature industrial workplaces also have the potential for exposure to electric arc or a flash fire event.

The rule states that before an employee enters the space, the internal atmosphere must be tested with a calibrated direct-reading instrument for oxygen content, for flammable gases and vapors, and for potential toxic air contaminants.

Atmospheric Testing and the New OSHA Construction Confined Spaces Standard

Subpart AA of 29 CFR 1926 will help to prevent construction workers from being hurt or killed by eliminating and isolating hazards in confined spaces at construction sites.

Identifying employees who understand the duties and responsibilities of a first responder and who are seriously committed are key to your recruiting success and building a higher-performance response team that can execute under extreme pressure.

#1 Priority When Disaster Occurs: Everyone Goes Home

When an amazing safety-first culture exists, the result is a waiting list of employees wanting to be on the emergency response team.

The amount of exposure to individuals can depend upon work practices, ventilation, and location.

Welding Safety and Health Considerations

The amount of exposure to individuals can depend upon work practices, ventilation, and location. Will the work be done in wide open areas, inside a building adjacent to other work processes and people, or potentially even in a confined space?



Behavior-Based Safety: A Visual Workflow Model

Successful organizations concentrate on a few specific precautions identified by data that will focus efforts to prevent injuries and incidents.

Increasing Safeguards for Crude Oil Trains

The July 2013 derailment in Lac-Mégantic, Quebec, of a crude oil train triggered many federal actions in Canada and the United States as crude oil shipments by rail skyrocketed.

"This worker literally came close to an early grave because the cemetery failed to provide proper excavation protections," said Anthony Ciuffo, OSHA

Grave Matter: OSHA Fines NY Cemetery Company for Cave-In

The agency cited St. John Cemetery Corp. for five violations, two classified as willful, after a worker was partially engulfed in May 2015 while in a grave opening.

Alabama Board Weighs Arc Fault Circuit Interrupter Measure

Indiana is the only other state that has amended AFCIs out of its building code, but a similar measure is currently pending in North Carolina, Jeffrey Sargent reported in the November/December NFPA Journal.

Florida Sets Record: A Decade with No Hurricanes

The most recent hurricane to make landfall in Florida was Wilma on Oct. 24, 2005, and it was also the last major hurricane to make landfall in the United States, according to weather.com.

Shell Oil Products Fined for Anacortes Refinery Release

L&I assessed one willful violation and the maximum $70,000 fine for knowingly and intentionally not following safe work practices for the control of hazards when shutting down the flare, as well as a serious violation and $7,000 fine for giving workers the incorrect procedure for shutting down the flare.

Atlanta Construction Company Exposed Workers to Dangerous Falls, OSHA Finds

The citations were issued for fall protection violations and failing to provide protective eyewear to workers using a pneumatic nail gun.

OSHA: Press Operator Loses Three Fingers at Metal Stamping Plant

Ohio Gasket & Shim Company, an Akron, Ohio, metal stamping company, has been cited for one willful violation and 12 serious safety violations.

California Company Recalls Celery Products

They are linked to an E. coli outbreak at Costco but are an ingredient in several companies' products, according to FDA.

Traffic Deaths Up Significantly This Year

NHTSA will hold a series of cross-cutting regional meetings across the country early next year to gather ideas, engage new partners, and generate additional approaches to combat human behavioral issues that contribute to road deaths.

WHO Launches Sexual Violence Toolkit

"WHO strongly condemns violence against women and girls and supports partners and countries' efforts towards the denormalization of this type of violence. Ensuring equality between women and men is a crucial part of these efforts," said WHO Director-General Dr. Margaret Chan.

NIST Releases Community Resilience Guide

Stephen A. Cauffman, manager of the NIST Community Resilience Program, reports that the Community Resilience Planning Guide sets out a collaborative six-step process that towns, cities, counties, and campuses can follow to better manage their hazard risks and build resilience.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence

Webinars