Articles


Job Hazard Analysis Process Redesign: Integration of Job Hazard Analysis and Work Planning Processes

Integrating the JHA and Work Planning processes reinforced the new philosophical approach for shifting responsibility for working safely to those responsible for planning and actually performing the work.

Although the numbers and types of fall hazards may vary greatly throughout industry sectors, no facility is without fall hazards. (New Pig photo)

Before the Fall: Recognize Fall Hazards and Conduct Training to Prevent Incidents

Even if a fall hazard isn't specifically addressed, if it can be identified, plans need to be made to mitigate the hazard and prevent employee injuries.

Pictograms are required safety data sheet elements that are intended to convey specific hazard information visually.

GHS HazCom Training is More Important Than Ever

An effective HazCom training program provides employees with a deeper understanding of the dangers and emergency situations they may face.

Fatality Investigation: 22-Year-Old Construction Laborer Killed in Trench Collapse

The Kentucky Fatality Assessment and Control Evaluation (FACE) program investigates fatalities and makes recommendations for preventing future similar injuries.

Manufacturers say that it

All-Important Equipment When Seconds Count

Placement of the emergency equipment is very important. A person in pain and with possibly obstructed vision should be able to traverse the path from hazard to the flushing units within seconds.

AEM Releases Updated Digger Derrick Safety Manual

The updated manual has new and expanded content on safe equipment operation, start-up, shutdown, and maintenance precautions.

Skilled Nursing Center Wins MIOSHA Award

The CET Gold Award criteria include having an effective Safety and Health Management System. MIOSHA staff consult with Gold awardees and evaluate their SHMS to ensure that key elements are implemented.

DOE Completes Evaluation of Hanford's Tunnel 2, Finds 'High' Risk of Collapse

The two PUREX storage tunnels hold mixed radioactive and chemical waste. A section of Tunnel 1 collapsed May 9, and state authorities then ordered DOE and CH2M HILL Plateau Remediation Company to immediately assess the integrity of both.



New Study Examines Injured Workers' Opioid Use By States

Comparing opioid use for workers injured in 2010 and 2013 over an average two-year period following the injury, the study found reductions in the average amount of opioids dispensed to injured workers in several states, with larger reductions seen in Kentucky, Maryland, Michigan, and New York.

ATSB Releases Report on Fatal Parachuting Crash

The 2014 crash killed all five aboard. "Our investigation did uncover a number of safety issues associated with occupant restraint, modification of parachuting aircraft, and scope for improving the risk controls associated with parachuting operations," said ATSB Chief Commissioner Greg Hood.

DOT Launches Infrastructure Grants Program

DOT will make awards under the $1.5 billion INFRA program to both large and small projects. For a large project, the INFRA grant must be at least $25 million. For a small project, the grant must be at least $5 million.

Operating Lifesaver Pushing Safety Awareness with Grants

Operation Lifesaver, Inc. and the Federal Railroad Administration announced $217,000 in grants will be awarded to 15 state Operation Lifesaver programs to fund rail crossing safety and trespass prevention public education projects in conjunction with OLI's U.S. Rail Safety Week this fall.

NOAA, OSHA: Watch Out for Excessive Heat

The National Weather Service and OSHA have partnered to increase awareness for outdoor workers and their employers during excessive heat events, with NWS incorporating specific outdoor worker safety precautions when heat advisories and warnings are issued. OSHA and Department of Labor again are reminding employers and workers this week to take precautions to protect themselves before a heat wave begins.

NFPA Will Develop High-Rise Fire Risk Assessment Tool

The risk assessment tool will help authorities having jurisdiction prioritize mitigation by incorporating a methodology that identifies key variables (such as wall materials and building fire protection systems). It is scheduled to be completed this year.

Bucharest Seminar Focused on Preventing Work-Related Cancers

The event included a discussion on amendments of Directive 2004/37/EC, which protects workers from the risks related to exposure to carcinogens or mutagens at work, and the challenges of its implementation in Romania.

FDA to Expedite Review of Some Generics

The announced change to its policy on how the agency prioritizes its review of generic drug applications means FDA will expedite the review of generic drug applications until there are three approved generics for a given drug product.

State Champions Preparing for 2017 National Truck Driving Championships

The 2017 National Truck Driving Championships, the 80th running of the event, will take place Aug. 9-12 at the Orange County Convention Center in Orlando.

The Dangers of Consumer Fireworks

The Consumer Product Safety Commission received 11 reports of nonoccupational fireworks-related deaths during 2015 and the highest number of injuries, 11,900, treated in U.S. hospital emergency departments in the past 16 years. Most injuries occur around the Fourth of July holiday.

NSC Report: No State Receives an "A" for Safety

The report says no state goes far enough to protect its residents from preventable deaths.

Washington Metro Retiring Oldest Railcars Early

The 1000- and 4000-series railcars are being removed from service by July 1. They are being replaced by more reliable 7000-series railcars, which averaged more than 176,000 miles between delays in April, while the 4000-series cars traveled an average of only 27,259 miles between delays in 2016.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars