U.S. Department of Labor Proposes $200k in Fines After Two Workers Suffer Injuries in Separate Incidents at a Northern Wisconsin Foundry

U.S. Department of Labor Proposes $200k in Fines After Two Workers Suffer Injuries in Separate Incidents at a Northern Wisconsin Foundry

OSHA finds a lack of energy control procedures, inadequate machine guarding, workers exposed to occupational noise and respirable crystalline silica.

Federal safety inspections conducted recently of a northern Wisconsin foundry determined workplace failures caused two workers to suffer severe injuries. In May, one worker lost two fingers to amputation and in July, an overhead hot metal carrier struck and injured another worker. While OSHA investigated the incident at Waupaca Foundry Inc. in Marinette, the agency opened a second scheduled inspection under its National Emphasis Program for Primary Metals. Inspectors found violations related to exposures to respirable crystalline silica and noise. During the the second inspection, the employer reported the July 17 injury to inspectors, which led to a third inspection.

According to a press release, OSHA determined a lack of energy control procedures, commonly known as lockout/tagout, exposed workers to hazards in both incidents. After completing the three inspections, OSHA issued one willful, seven serious and five other-than-serious violations to Waupaca Foundry and proposed $200,895 in penalties.

“Foundries are inherently dangerous industrial operations, where workers are exposed to hazards from machinery, trips and falls, occupational noise, and respirable silica,” said OSHA Area Director Robert Bonack in Appleton. “Employers are responsible for providing a safe and healthful workplace for their workers.”

The Bureau of Labor Statistics reports the foundry industry had a 6.4 percent rate of injury for every 100 workers in 2020.

OSHA cited the following violations:

Waupaca Foundry Inc. is a leading supplier of iron castings to the automotive, commercial vehicle, agriculture, construction and industrial markets. The company has 15 business days from receipt of its citations and penalties to comply, request an informal conference with OSHA’s area director or contest the findings before the independent OSHRC.

About the Author

Shereen Hashem is the Associate Content Editor for Occupational Health & Safety magazine.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured