The summer construction season means workers and safety managers must be prepared for heat stress, falls, puncture and crushing injuries, and noise exposures.

Fifth Stand-Down on Preventing Construction Falls Set for May 7-11

"The Stand-Down is not limited only to construction industry trades," Dean McKenzie, director of OSHA's Directorate of Construction, and Christine M. Branche, Ph.D., FACE, principal associate director of NIOSH and director of its Office of Construction Safety and Health, said in an email. "Each year, large corporations and small companies have joined us to make this effort a success."

The fifth annual National Safety Stand-Down to Prevent Falls in Construction is taking place during the week of May 7-11, with OSHA, NIOSH, and CPWR urging employers to take part. This is the seventh year of the National Construction Fall Prevention Campaign, and the two federal agencies are asking employers to set aside time to have open discussions about fall prevention.

Falls are still a leading cause of deaths in construction. During 2016, there were 370 fatalities related to falls out of 991 total fatalities in U.S. construction.

The agencies reported that during the past four years, thousands of companies participated in the National Safety Stand-Down, reaching some 7.5 million employees across the United States and internationally through more than 130 public events and thousands of private stand-downs per year. The focus for employers should be to:

  • PLAN ahead to get the job done safely;
  • PROVIDE the right equipment; and
  • TRAIN everyone to use the equipment safely

"The Stand-Down is not limited only to construction industry trades," Dean McKenzie, director of OSHA's Directorate of Construction, and Christine M. Branche, Ph.D., FACE, principal associate director of NIOSH and director of its Office of Construction Safety and Health, said in an email. "In fact, due to valuable information gathered from your participation in previous National Stand-Downs, we have found that many stakeholders within the construction industry as well as general industry and governmental entities join us in this event each year. Each year, large corporations and small companies have joined us to make this effort a success. If your employees work at height or are exposed to falls, you have a vested interest in standing down your operations to emphasize fall protection or other safety-related topics.

OSHA's information is located at http://www.osha.gov/StopFallsStandDown and on the Campaign webpage, http://www.osha.gov/stopfalls/index.html. NIOSH's information is available at https://www.cdc.gov/niosh/construction/stopfalls.html. CPWR's information is available at http://stopconstructionfalls.com.

Product Showcase

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence