Energy Inspector General Faults Beryllium Controls at Los Alamos National Laboratory

The IG's Feb. 20 report concluded LANL did not fully implement an effective Prevention Program as required, did not complete hazard assessments with sampling plans for each record in its 2016 beryllium inventory, and released potentially contaminated areas for other use without a formal evaluation to ensure any residual contamination was within acceptable limits.

The U.S. Department of Energy's Inspector General issued a report Feb. 20 that is critical of the controls on beryllium exposure that are used by DOE's Los Alamos National Laboratory in Los Alamos, N.M. The report concludes LANL did not fully implement an effective Prevention Program as required, did not complete hazard assessments with sampling plans for each record in its 2016 beryllium inventory, and released potentially contaminated areas for other use without a formal evaluation to ensure any residual contamination was within acceptable limits.

The report is cited in a Feb. 26 article by article by Rebecca Moss of The Santa Fe New Mexican that is featured on the ProPublica.org website; The Santa Fe New Mexican is a member of the ProPublica Local Reporting Network.

The report discusses how the IG personnel conducted their inspection between May 2016 and February 2018 at LANL, saying the office initiated it because of "the significant risk to the work force of beryllium exposure." It says "several internal and external entities" from 2009 to 2015 assessed LANL's compliance with its Prevention Program and cited concerns with beryllium inventory completeness and hazard assessment documentation.

The report makes four recommendations to the manager of the Los Alamos Field Office:

  • LANL documents inventory updates, hazard assessments, and sampling plans as required by the lab's federally approved Chronic Beryllium Disease Prevention Program.
  • LANL reviews and updates the inventory to ensure it is accurate and complete.
  • The Field Office review and approves, as appropriate, significant revisions to the Chronic Beryllium Disease Prevention Program.
  • LANL, in coordination with the Field Office, should assess the risk associated with repurposed beryllium areas and make a risk-based judgment about the level of residual contamination and potential for beryllium exposure.

In its response, which is included in the report, LANL management said it concurs with the recommendations and that corrective actions have been initiated or are planned to address issues identified in the report. It also said the National Nuclear Security Administration's Office of Safety and the DOE Office of Environment, Safety and Health Assessments will complete an evaluation of the Chronic Beryllium Disease Prevention Program by Dec. 31, 2018.

Also included is a Jan. 20, 2018, letter to the IG's office from William I White, NNSA chief of staff and associate principal deputy administrator, in which White writes, "Although the weaknesses noted by the IG did not result in any known exposures to beryllium, NNSA is committed to strengthening worker protection programs including beryllium safety."

Chronic beryllium disease is an often debilitating and sometimes fatal lung condition, as the report states.

Product Showcase

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence