One Tall Order

Wind turbines are getting larger and larger. Some turbines' nacelles can be about 160 meters—about 525 feet—above the ground, and the blades can be about 75 meters long.

Undoubtedly an engineering feat, Hywind Scotland also may present unique safety challenges, now that the 30MW wind farm floating off the coast of Scotland has become operational in October 2017. It consists of five turbines, each measuring 830 feet from its base to the tips of its 75-meter blades. The farm could be used in waters half a mile deep, and these five are 15 miles offshore.

It is the world's first commercial floating wind farm, operated by partners Statoil and Masdar; because it can operate in such deep water, it can work in areas that have been inaccessible for offshore wind, Irene Rummelhoff, executive vice president of the New Energy Solutions at Statoil, said Oct. 18.

Larger turbines produce more energy, so manufacturers have continued to develop taller towers and longer blades. But performing maintenance on them is more dangerous as a result.

Two years ago, during ASSE's Safety 2015 conference in Dallas, an insurance industry presenter on wind turbine safety hazards explained that the hazards turbine maintenance workers face—falls, confined spaces, fire hazards, lockout/tagout incidents, first aid injuries, electrical hazards, machine guarding, arc flash—are increased when they're working 300 feet above the ground, which makes rescue or descent more difficult. At sea and miles offshore, it could be particularly difficult.

He showed the audience a photo from a nacelle fire and explained that tool drops were one of the biggest challenges for the maintenance crews.

When that presentation was delivered, turbine height had soared by about 50 percent in just six years, to about 100-110 meters high, and by 96 percent in rotor diameter, and the speaker predicted annual installations would remain high through 2050. Now, some of the largest turbines' nacelles can be about 160 meters—about 525 feet—above the ground, and the blades can be about 75 meters long. The nacelles of the Hywind turbines are "large enough to fit two typical London double decker buses," according to Statoil.

This article originally appeared in the December 2017 issue of Occupational Health & Safety.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

Featured