Otis Elevator Loses LOTO Appeal

A federal appeals court panel ruled 3-0 that OSHA's lockout/tagout standard does apply to a June 2009 incident in which an Otis service technician suffered a hand injury while repairing a freight elevator gate.

OSHA and the Labor Department have won a lockout/tagout enforcement case that was appealed to the U.S. Court of Appeals for the D.C. Circuit by the cited company, Otis Elevator Company. Decided Aug. 15 by a unanimous three-judge panel, the case of Otis Elevator Company v. Secretary of Labor, et al., No. 13-1194, involved a June 2009 repair job on a freight elevator at a store in Brookfield, Wis. The company sent a service technician to repair a jammed metal gate on the elevator, and the tech ducked under the partially open gate, climbed a ladder to access the top of the elevator, and threw two switches to ensure no one could call the elevator or move the gate electronically. But he didn't follow company procedure of blocking the gate mechanically, according to the court's opinion.

Seeing that one of the chains was loose, he pried it back onto the sprocket, and the gate immediately began to drop. "The mechanic realized that, as a result of the abrupt release of the jam, the gate was about to slam down and break the chain's connecting link. He reacted by grabbing the chain, which 'drug' his hand through the sprocket and chain, resulting in a serious laceration to his finger," it states.

After being cited for a LOTO violation, Otis argued that the OSHA lockout/tagout standard did not apply because the startup of the machine was not "unexpected." An administrative law judge agreed and found for the company, holding additionally that no store employees were in danger of being injured. But the full Occupational Safety and Health Review Commission reinstated the citation, holding that the LOTO standard did apply to the technician's work because the standard's applicability depends on whether there was a potential for the unexpected release of stored energy that could injure the mechanic or others and, as the mechanic testified, he could not predict when the jam would yield.

The commission reduced the penalty in the case to $500.

The appellate panel agreed with the OSHRC ruling and upheld the commission's decision.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars