This FMCSA photo was included in NTSB

NHTSA Proposes More Passenger Protection in Motorcoaches

The agency has proposed a new federal motor carrier safety standard to enhance protections for rollover crashes.

The National Highway Traffic Safety Administration has proposed a new federal motor vehicle safety standard to protect passengers in motorcoaches and other large buses – those with a gross vehicle weight above 26,000 pounds -- in rollover crashes. The proposed rule published Aug. 5 aims to improve the structural design of these vehicles by ensuring that the space around passengers remains sufficiently intact and the emergency exits remain operable.

"The consequences for passengers in rollover crashes are severe," Transportation Secretary Anthony Foxx said. "I want passengers to know that when this department sees opportunities to make their travel safer so that they can more confidently visit their families or get to work, we are going to do just that, and we believe this proposal is a step in that direction."

The proposed standard would establish a new rollover test and would:

  • Require space around occupant seating positions to be maintained to afford occupants a survivable space in a crash
  • Require the seats, overhead luggage racks, and window glazing to remain attached to their mountings during and after the test
  • Require emergency exits to remain closed during the rollover test and operable after the test

The proposed test procedure and performance requirements are closely modeled after European regulations for large buses, according to NHTSA.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars