A fire severely damaged the B777 after it crashed on July 6, 2013, while on approach to San Francisco International Airport. (Mike Brake / Shutterstock.com photo)

NTSB Opens Asiana Crash Hearing

The safety board's experts are explaining why the pilots failed to correct a landing approach that was too low and slow, causing the July 2013 crash at San Francisco International Airport.

The National Transportation Safety Board held its first public hearing today about the July 16, 2013, crash of Asiana Flight 214 at San Francisco International Airport, with board experts explaining their findings and releasing an animation of the accident sequence. The animation ends with a few seconds of video showing the impact, fire, and the aircraft crashing onto the runway.

Board experts are being questioned by NTSB board members about the flight crew's actions during the approach and also about Asiana’s standard operating procedures. Acting NTSB Chairman Christopher Hart opened the hearing by offering condolences to families of three passengers who died in the crash and to passengers who were injured and their families.

"The report also answers the basic question about the accident itself: Why did this airplane crash while executing a visual approach on a clear day?" Hart said. "It is one of the most sophisticated and automated aircraft in service. Automation has unquestionably made aviation safer and more efficient, but the more complex it becomes, the more challenging it is to be sure that pilots adequately understand it. In this instance, they over-relied on systems they did not understand and flew the aircraft too low and slow, colliding with a seawall at the end of the runway. More than 15 years ago, Professor James Reason wrote that in their efforts to compensate for the unreliability of human performance, designers of these control systems have created opportunities for new error types that can be more serious than those they were seeking to avoid. Today, we will discuss many recommendations in the report that address how humans interact with automation to prevent similar accidents in the future."

NTSB staffers have prepared 30 findings based on their investigation. One is that while the airport's instrument landing system glide slope was out of service during this incident, that should not have resulted in a crash. Another cites automation reliance and fatigue as factors affecting the flight crew's performance.

This was the first time the flying pilot had flown a visual approach without a glide slope, and he had an inadequate understanding of the auto throttle engagement feature on this B777 aircraft, according to the staff's presentation.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars