MSHA: Advance Notification of Mine Inspectors Still a Problem

There have been several recent instances in which MSHA has been able to detect the occurrence of advance notice.

According to the U.S. Department of Labor's Mine Safety and Health Administration, some mine operators continue to tip off their employees when federal inspectors arrive to carry out an inspection. The Federal Mine Safety and Health Act of 1977 prohibits providing advance notice of inspections conducted by MSHA.

There have been several recent instances in which MSHA has been able to detect the occurrence of advance notice. For example, on March 22, agency inspectors responded to a hazard complaint call about conditions at Gateway Eagle Coal Co. LLC's Sugar Maple Mine in Boone County, W.Va. A truck driver with J&N Trucking reportedly alerted mine personnel by citizens band radio of the inspectors' arrival. The inspection turned up 14 violations for advance notification, accumulations of combustible material, and inadequate pre-shift and on-shift examinations, as well as a failure to comply with the current ventilation plan, maintain the lifeline, maintain permissibility of mobile equipment, and maintain firefighting equipment.

As a second example, during a Feb. 29 inspection at Rhino Eastern LLC's Eagle No. 2 Mine in Wyoming County, W.Va., a dispatcher's decision to shut down the belts prompted a call from the section foreman about his actions. The dispatcher responded that an MSHA inspector was at the mine. During this inspection, three citations were issued for failure to comply with the roof control and ventilation plans. In addition, a citation was issued to Applachian Security, a contractor, for providing advance notification of the MSHA inspection. Rhino Eastern's Eagle No. 1 Mine was placed on potential pattern of violations status in November 2010 and again in August 2011 after a miner was killed in a rib collapse, and the mine's compliance record deteriorated.

"Providing advance notice of an inspection is illegal," said Joseph A. Main, assistant secretary of labor for mine safety and health. "It can obscure actual mining conditions by giving mine employees the opportunity to alter working conditions, thereby inhibiting the effectiveness of MSHA inspections. Furthermore, it appears that current penalties are not sufficient to deter this type of conduct."

Upper Big Branch Mine superintendent Gary May recently entered into a plea agreement with the U.S. Department of Justice, admitting to conspiracy to give advance notification of mine inspections, falsify examination of record books, and alter the mine's ventilation system before federal inspectors were able to inspect underground. May testified that through these unlawful practices, the mine operator was able to avoid detection of violations by federal and state inspectors.

"Despite the attention to the issue that has resulted from the Upper Big Branch investigation and recent testimony from Gary May, advance notice continues to occur too often in the coalfields," Main said. "Upper Big Branch is a tragic reminder that operators and miners alike need to understand advance notice can prevent inspectors from finding hazards that can claim miners' lives."

Download Center

HTML - No Current Item Deck
  • Free Safety Management Software Demo

    IndustrySafe Safety Management Software helps organizations to improve safety by providing a comprehensive toolset of software modules to help businesses identify trouble spots; reduce claims, lost days, OSHA fines; and more.

  • The Top 5 Safety and Technology Trends to Watch in 2019

    Get the latest on trends you can expect to hear more about in 2019, including continued growth of mobile safety applications, wearable technology, and smart PPE; autonomous vehicles; pending OSHA recordkeeping rulemaking; and increased adoption of international safety standard, ISO 45001.

  • Get the Ultimate Guide to OSHA Recordkeeping

    OSHA’s Form 300A posting deadline is February 1! Are you prepared? To help answer your key recordkeeping questions, IndustrySafe put together this guide with critical compliance information.

  • Safety Training 101

    When it comes to safety training, no matter the industry, there are always questions regarding requirements and certifications. We’ve put together a guide on key safety training topics, requirements for certifications, and answers to common training questions.

  • Conduct EHS Inspections and Audits

    Record and manage your organization’s inspection data with IndustrySafe’s Inspections module. IndustrySafe’s pre-built forms and checklists may be used as is, or can be customized to better suit the needs of your organization.

  • Industry Safe

OH&S Digital Edition

  • OHS Magazine Digital Edition - January 2019

    January 2019

    Featuring:

    • PREVENTING ERRORS
      Production vs. Safety 
    • EMERGENCY SHOWERS & EYEWASH
      Meeting the Requirements for Emergency Equipment
    • CONSTRUCTION SAFETY
      The State of Contractor Safety
    • FOOT PROTECTION
      The Three Keys to Effective Chemical Management
    View This Issue