Contractor Faces Nearly $75,000 in Fines for Cave-in, Other Hazards

An unprotected trench and other hazards at a Walgreens construction site in New Haven, Conn., have resulted in OSHA proposing a total of $74,600 in fines against an Orange, Conn.-based contractor. Louis Gherlone Excavating Inc. was cited for a total of 11 willful, repeat, and serious violations of safety standards at a sewer line installation at the site, the agency reported yesterday.

OSHA opened its inspection on July 26, 2007, after an agency inspector spotted Gherlone employees working in unprotected trenches seven to nine feet in depth. OSHA standards require that all trenches five feet or deeper be protected against collapse. As a result, OSHA issued the company one willful citation, with a proposed $56,000 fine, for the lack of cave-in protection.

"An unprotected trench can collapse in seconds, burying employees beneath tons of soil and debris before they can react or escape," said Robert Kowalski, OSHA's area director in Bridgeport. "The hazard is so severe that OSHA inspectors will stop and open an inspection on the spot whenever they observe an unprotected trench, as happened in this case."

OSHA issued two repeat citations, carrying $9,000 in proposed fines, for hazardous conditions similar to those cited in a 2006 inspection of Gherlone at a West Haven jobsite. At that time, the company was cited for failure to provide a safe means of exit for employees from trenches and for failure to inspect the trenches for hazardous conditions. Six serious citations, with $8,400 in proposed fines, were issued for potential fall hazards from an unprotected walkway and unsecured ladders; exposure to potential injuries from loose rocks, debris and falling objects; a chain sling not marked with its lifting capacity; untrained employees operating a laser; and employees not trained to recognize ladder and fall hazards. Finally, two other-than-serious citations, with $1,200 in proposed fines, were issued for incomplete and inaccurate recording of occupational injuries and illnesses.

Detailed information on trenching and excavation safety, including an interactive e-Tool, is available on OSHA's Web site at www.osha.gov/SLTC/constructiontrenching/index.html.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Webinars