PPE


Painting Firm Penalized for Lead-Contaminated Eating Areas, PPA, More

"Few Americans are aware of lead's deadly effects or the fact that lead taken home on clothing and work tools can infect an entire family," said OSHA Area Director Richard Gilgrist in Cincinnati.

This is the type of NRR label currently used on hearing protectors.

NHCA Agrees More Time Needed to Retest Hearing Protectors

The National Hearing Conservation Association's comments on the EPA proposal recommend simpler labels, 42 months to retest and relabel protectors, and requiring a statement on the labels saying individual quantitative fit testing is the only way to estimate a user's attenuation.

Utility Contractor Zapped with Penalty for Potential Electrocution

The Connecticut-based company received citations for working around energized transmission lines that were not grounded and working within the minimum approach distance in a bucket truck that was improperly rated for the work being conducted, OSHA said.

An image of emergency medical personnel.

OSHA Issues Guidance for Safeguarding Emergency Medical Responders

Titled "Best Practices for Protecting EMS Responders During Treatment and Transport of Victims of Hazardous Substance Releases," the new guidance document addresses adequate training and personal protective equipment for emergency medical services responders who assist victims of hazardous substance release incidents.

Asbestos Contractor Fined $484K for Putting Workers in Harm's Way

According to OSHA, workers at the site lacked proper respirators and protective clothing and had not been informed of the presence of asbestos at the site, and the employer failed to determine the asbestos exposure level and establish a regulated work area for asbestos removal and handling.

Cart with modified handle

Move Big Loads Safely

You're in the market for a material handling product, something that can help your employees move those loads quickly and safely. You surf the Web and flip through catalogs, but how do you start to narrow your choices? The same way best-in-class manufacturers create innovative products: research, testing, and knowledge.

firefighting

FEMA Awards $1 Million to Take Firefighting Technology to New Level

The new system will display the risk of extreme heat stress and time to flashover (the point when all combustible materials in a room simultaneously erupt in flames) on the incident commander's screen, along with the firefighters' locations and vital signs.

Faster Detection Aids Safety

OSHA and other federal agencies track electrical accidents of all kinds, but not arc flash incidents specifically. The Institute of Electrical and Electronic Engineers (IEEE) and the National Fire Protection Association (NFPA) are working to change that through a collaborative research project to conduct extensive testing on arc flash. At present, only data on all electrical accidents are available.



Electrical Contractor Achieves 2 Million Hours, No Lost Time

Safety Director Ted Sommer said the company "strives every day to meet our goal of zero incidents through preplanning, training, and open coordination among the trades."

ASTM Starts Certification Programs

"The board agreed that the ability for the society to offer certification programs . . . is important in remaining relevant in the changing global marketplace," ASTM International President James A. Thomas said.

This poster advertises the 2010 Safety Products Student Design Challenge.

7th Safety Products Student Design Challenge Under Way

Post-secondary students compete in this annual event, which is sponsored by the Safety and Protective Products Division and the Narrow Fabrics Institute of IFAI. A University of Wisconsin Stout design team placed first in the 2009 contest.

Colorado Grain Fatality Brings $1.6 Million in Fines

OSHA issued $1,592,500 of the $1.6 million in fines against Tempel Grain Elevators LLP of Wiley, Colo., in connection with the May 29 engulfment death of a 17-year-old worker.

OSHA Issues H1N1 Enforcement Procedures Directive

States are required to notify OSHA whether they intend to adopt policies and procedures identical to today’s Instruction or adopt or maintain different policies and instructions for conducting inspections to minimize high to very high risk occupational exposures to the virus identified as 2009 H1N1 influenza.

Worker's Arc Flash Burning on SUNY Campus Leads to $88K Fine

"This is a clear example of the grave consequences that can result when basic electrical safeguards are not provided and used," said Arthur Dube, OSHA's area director in Buffalo.

The 70E 2009 edition "elicited an unprecedented number of proposals and comments, reflecting the meteoric rise in awareness of electrical safety issues in recent years."

NFPA 70E Users' Input Invited

The 2012 edition of the Standard for Electrical Safety in the Workplace is expected to be issued in August 2011, but it is important for its users to offer proposals now, writes Jeffrey Sargent, NFPA's senior electrical specialist and staff liaison for NFPA 70E.

Australian Agency Backs Control Banding for Nanomaterials

This approach is the correct risk management process because data are lacking for the risk potential of individual engineered nanomaterials, but there is some understanding of hazards posed by different groups of nanomaterials, Safe Work Australia said in a new report.

OSHA Fines Ventilation Manufacturer $511,000 in Worker's Death

OSHA has cited Loren Cook Co. of Springfield for seven alleged willful and three alleged serious violations after a worker was killed by an ejected machine part on May 13.

Ophthalmology Campaign Urges Prevention on World Diabetes Day

As part of today's World Diabetes Day, the American Academy of Ophthalmology (AAO), through its EyeSmart™ campaign, is reminding the public that an annual dilated eye exam can help prevent vision loss in people with diabetes.

protective goggles

ISEA's Eye and Face Protection Group Writing Biohazard Standard

The group, consisting of representatives from 14 major vision protection suppliers, held a kickoff meeting Nov. 9 during the association's Fall Meeting.

Jeff Gordon 24

NASCAR's Jeff Gordon Hosts Free Training DVD on Air Toxics Reductions

In December 2007, EPA issued a rule requiring reductions in air toxic emissions from auto body shops that use spray application to paint cars or that use paint strippers containing a toxic substance called methylene chloride. Existing shops must comply with the rule by January 2011; new shops have to comply by 180 days after startup.

Featured

Artificial Intelligence

Webinars