PPE


Texas Tower Manufacturer Cited for 41 Safety, Health Violations

The company, which manufactures guyed and self-supporting towers and monopoles, was charged with three willful and 38 serious violations.

The OSHA memo clarifies when the agency says flame-resistant clothing must be worn by oil and gas workers, saying flash fires could generate temperatures as high as 1,900 degrees Fahrenheit.

OSHA Says FR Clothing Required in Many Oil & Gas Jobs

A March 19 memo sent to regional administrators and state plans by Richard Fairfax and Steve Witt, who head the OSHA enforcement and state programs units, clarifies when citations should be issued for failing to provide it.

Flood Recovery Work Swamped with Hazards

OSHA advises flood recovery workers to evaluate work areas for all hazards and use personal protective equipment.

Construction deaths in Singapore rose from 25 in 2008 to 31 in 2009.

Singapore Work Fatalities Up 4.5 Percent Last Year

The country's Ministry of Manpower promised on Monday to focus enforcement inspections on construction and maritime, where 63 percent of the 2009 fatalities occurred.

Study: Commercial Drivers' Safety Belt Use Up Nearly 10 Percent

According to FMCSA, safety belt use was at 78 percent in states with primary safety belt laws, which allow law enforcement to stop drivers for not using a safety belt, versus 67 percent in states with weaker laws.

Louver Maker’s ‘Blatant Disregard’ for Safety Results in Proposed $55,500 Fine

The company was inspected as part of a federal site-specific targeting program based on its high injury and illness rates in comparison to the national rates.

A final draft of the 2010-2016 strategic plan will be posted for review and comment in July 2010.

DOL Revealing 2010-2016 Strategic Plan

Several agencies within the department, including OSHA, have their own presentations on the DOL page that explain how they support the draft plan. It will be posted for review and comment in July.

Power Tool Safety Tips from OSHA

Appropriate personal protective equipment such as safety goggles and gloves must be worn to protect against hazards that may be encountered while using hand tools. Workplace floors shall be kept as clean and dry as possible to prevent accidental slips with or around dangerous hand tools.



OSHA Releases Electric Power Safety eTool

The eTool provides preventative tips for protecting electric power workers’ safety and health.

Poultry Processing Plant Penalized for Plethora of Problems

The 45 serious violations of which the facility stands accused address hazards with industrial trucks, falls, PPE, machine guarding, electrical safety, process safety management, respirators, and emergency response.

Beware shockingly cold water

Coast Guard Issues Fair Weather Boating Warning

With coastal water temperatures just a few degrees above freezing and inland waters even colder, the lure of spring-like weather creates a deceptively dangerous combination, USCG notes.

Builders Cited for Impalement, Cave-In Hazards at Synagogue Site

Unguarded protruding steel rebar, uncovered 7-foot deep holes, and an unprotected 14-foot-high excavation wall were among the unsafe conditions OSHA found at the construction site in Newton, Mass.

EU's CDC Sees No New H1N1 Wave Coming

The most likely scenario for Europe throughout 2010 is continuing low-level transmission and small outbreaks of the pandemic 2009 A(H1N1) influenza, although larger outbreaks could occur, according to the March 9 forecast.

Wholesale Food Distributor Cited for 'Cross Section' of Warehouse Woes

An inspection found workers unable to open emergency exit doors from inside the workplace; a lack of specific procedures to lock out machine power sources; missing guardrails; improperly stored oxygen cylinders; several electrical hazards; and more.

Chris Patton, CSP, president of ASSE

ASSE, AIHA Offer Creative Ideas

The March 4 "OSHA Listens" meeting did not lack for out-of-the-box thinking. What OSHA does with the input from ASSE President Chris Patton and others is the crucial part, of course.

New England Contractor Fined for Asbestos Hazards, Respiratory Deficiencies

"OSHA standards are designed to minimize the risk of exposure and its potential impact on workers' health, but they are effective only so long as employers adhere to them," said Brenda Gordon, OSHA's area director for Boston and southeastern Massachusetts.

OSHA Presses Printing Plant for Improvements, Fines Facility $62,350

Specifically, the agency found instances of improper transfer and storage of flammable liquids; lack of specific lockout/tagout procedures and training to prevent the unintended startup of machines during maintenance; lack of hearing protection; inadequate respirator training, fit-testing, medical evaluation, inspection, and maintenance; unguarded grinders; and more.

Ansell Welcomes New CEO

Magnus Nicolin, who was previously Newell Rubbermaid Inc.'s president for Europe, Middle East, Africa, and Asia Pacific, was chosen after "an extensive internal and external search that produced an exceptionally strong candidate pool," Ansell Chairman Peter Barnes said.

Blurred Vision

The Risks and Costs of Blurred Vision

Sweating the small stuff can become a big problem. Clear vision is a must in order for your workers to be safe.

Hearing Conservation Compliance

Hearing Conservation: Going from Compliance to Effectiveness

We must face the reality that hearing conservation efforts are interdisciplinary, integrated, and need leadership that executes a detailed and appropriate plan.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars