PPE


Construction Firm Faces $56,000 Fine for Fall Hazards in Pa.

During an inspection that was part of a regional emphasis program, investigators observed employees working without adequate protection on platforms as high as 20 feet.

Papers Sought for 2011 Protective Clothing Symposium

The ASTM International Committee F23 on Personal Protective Clothing and Equipment is sponsoring the June 16-17, 2011, event in Anaheim. Interested presenters must submit a 250-300 word abstract online by Aug. 15, 2010.

UAW Wants Comprehensive Metalworking Fluids Standard

The union, which represents some 390,000 active members, said May 11 that it filed its petition last month with OSHA.

The CSE Corp. SR-100 primarily uses a chemical process to generate a 60-minute supply of oxygen.

CSE Corporation Expands SR-100 Alert

The self-contained self-rescuer unit used by underground miners generates 60 minutes of oxygen when started, but the company's investigation suggests start-up oxygen cylinders may fail in any field-deployed unit.

Hear This: Free Seminars on Hearing Conservation to Take Place in Texas

The three-hour programs, designed to help prevent noise-induced hearing loss among workers, are set to take place in Dallas, San Antonio, Corpus Christi, and Houston, June 7-10, respectively.

Yet Another U.S. Postal Facility Fined, This Time in Chicago Area

Within the past five years, OSHA has conducted more than 900 inspections at USPS facilities across the country and has issued more than 600 citations.

Investigators Witness Fall Hazards, Fine Construction Firm $47K

Among other violations, the company failed to provide workers with a fall arrest harness with a lanyard and did not adequately plank scaffolding during masonry work that reached as high as 24 feet, OSHA said.

Coking Plant Cited for Respiratory, Industrial Hygiene, PPE Violations

Specifically, the facility failed to adequately train workers on respirator selection, use, storage, and maintenance; did not supply positive-pressure filtered air to all work cabs; did not label containers of coke-contaminated clothing; allowed food and beverages to be consumed in an area with visible accumulations of coke-oven emissions; and more, according to investigators.



Studies as recently as 2009, including by CDC, found weaknesses in respiratory, hand hygiene, PPE, staff training, and written procedure guidelines.

OSHA Seeks Data on Health Care Infectious Agents

Requesting comments by Aug. 4, the agency noted, "The lack of adherence to voluntary infection control procedures is of particular interest to OSHA."

Buyout of Sperian Protection on Track

The company on Wednesday said work continues on filing a voluntary public tender offer by Menelas France SA, with agreement by Sperian's banks "close to being obtained."

OSHA Seeks Input for Proposed 'I2P2' Rule

The agency is hosting three meetings next month -- one on June 3 in East Brunswick, N.J., another on June 10 in Dallas, and the final on June 29 in Washington, D.C. -- to gather comments. Registration will remain open until the meetings are full.

OSHA Blasts Chicago Sandblasting Firm for Inadequate PPE, Lead Exposure, More

This contractor has been inspected by OSHA 25 times since 1991 and has been issued numerous willful, serious, and repeat violations, including many lead violations, the agency said.

Metalworking fluids can cause respiratory problems including occupational asthma from aerosol exposure and dermatitis from skin absorption.

Dermatitis Reference Being Added to Metalworking Standard

A revision of ASTM E2148-06, Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety, will add a reference to the new E2693-09, Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment.

Failing to develop procedures and provide training for locking out machine power sources to prevent unexpected startup brought a serious citation in the case.

Postal Service Hit with $558,000 Fine

OSHA announced Friday that the U.S. Postal Service received eight willful citations after inspectors found four untrained or unqualified workers performing tests on live electrical equipment.

This photo of the famed Chicago skyline comes from the tourism office of the city.

Act Now to Present at ASSE's Centennial Conference

July 16, 2010, is the deadline for proposals from potential speakers eager to be on the program of the June 12-15, 2011, meeting, which will be in the perfect location: downtown Chicago.

Cal/OSHA shut down 16 work sites in 2009 for imminent heat hazards, and the agency issued nearly $2 million in fines and 1,158 citations for alleged violations of its Heat Illness Prevention Standard.

Heat Season Starts Now

Outdoor workers should be protected against excessive heat exposure, and particularly if they are wearing protective apparel.

Arc Flash and Molten Metal — the Hidden Hazard

Since the inception of the NFPA 70E 2000 Edition 10 years ago, there has been a major evolution in our understanding of the electric arc flash hazard.

This F17 laser safety eyewear from Laservision, a St. Paul, Minn., company, can be fitted with several types of filters or prescription lenses.

New Non-Ionizing Radiation Duties for UK Employers

The Control of Artificial Optical Radiation at Work Regulations took effect April 27 and make employers responsible for analyzing visible light hazards, such as from lasers, and protecting and training workers exposed to them.

FEMA Accepting 2010 FIRE Act Grant Applications

The application period will close May 28. The grants help fire departments and nonaffiliated EMS units with staffing, training, and equipment.

Fall Violations Included in Two Enforcement Cases

Combined penalties proposed in citations against Birdair Inc. and National Wrecking Co. in Chicago total $105,000.

Product Showcase

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence

Webinars