PPE


The December 2010 compliance directive said 1926.501(b)(13) would be interpreted as written.

7th Circuit Upholds OSHA Fall Protection Directive

And the panel's reasoning in the April 7 decision offers support for the hearing protection reinterpretation OSHA recently withdrew.

Failure-to-Abate Notices Add Up to $112,530 in Fines for N.J. Firm

OSHA initiated an inspection on Oct. 21, 2011, in response to a complaint alleging that the employer had not abated safety and health violations cited on July 14, 2010.

NIOSH Reaches Twitter Milestone, Wants Nano Input

The National Institute for Occupational Safety and Health's Twitter page has passed 100,000 followers. Until April 15, NIOSH is accepting comments on how to enhance current nanotechnology research.

Products Bearing BioPreferred Labels in Stores Soon

USDA identified the first 60 products independently certified to meet the program's standards for consisting wholly or significantly of agricultural ingredients -- renewable plant, animal, marine or forestry materials. About 400 products have been submitted in the first three months.

Propane Tank Firm Cited Following Forklift Fatality

OSHA cited the company for 19 safety violations following the October 2010 death of a worker who was ejected and crushed after the forklift he was operating overturned.

Trenching Hazards Pile Up $115,000 in Penalties for Ala. Contractor

"A trench can become a grave in seconds. Disregarding workers' safety by leaving them unprotected from potential cave-in and struck-by hazards is unacceptable and will not be tolerated," said Roberto Sanchez, OSHA's area director in Birmingham.

NJ Bearings Manufacturer Penalized $88,200

RBC-West Trenton was investigated under OSHA's Site-Specific Targeting Program, which focuses on industries with high injury and illness rates.

Electrical, Combustible Dust Hazards Add Up to $83,400 in Fines for Volvo Aero

Specific violations cited by OSHA included workers being hoisted on the load hook of an overhead crane, an improperly designed combustible dust collection system, and a lack of personal protective equipment.



Shock-Absorbing Lanyards Can Let You Down

With the reduction in size and weight comes a reduction in price, making PFLs more affordable than ever.

Using Dielectric and Electrical Hazard Shoes

Minute holes in the soles of the footwear are the biggest area of concern in the protection scenarios.

Tyson Foods Cited for LOTO, Respiratory Protection Hazards

The company faces penalties totaling $45,000 as a result of an OSHA inspection conducted in October 2010.

A New Generation of Latex Gloves

Most proteins that can trigger latex allergies can be removed.

Parts made, safety, and employee morale have a significant impact.

Productivity: Small Changes Can Lead to Large Gains

Parts made, safety, and employee morale have a significant impact. A tire manufacturer saved $500,000 from its injury costs the first year.

The group will seek more members from across other disciplines to collaborate on concussion research and testing.

Cooperative Forms to Address Sports Concussions

The group, which includes protective equipment manufacturer Rawlings Sporting Goods, will coordinate concussion research and testing.

Contractor Zapped with $60,800 in Fines for Electrocution, Fall Hazards

OSHA opened its inspection of A.C. Castle Construction upon observing employees working without fall protection on the building's roof and on a ladder jack scaffold, exposing them to falls of nearly 19 feet.

NYC Buildings Commissioner Robert LiMandri

NYC Buildings Department Sets Safety Week Agenda

Taking place April 25-29, the Construction Safety Week will include presentations addressing accident prevention, new concrete requirements, safe use of scaffolds, and safety in demolition.

Texas Firm Fined $75,525 for Amputation Hazards

The planned inspection found that employees working on or around hazardous machinery were not properly protected.

Worker Amputations Lead to $107,200 Fine for Missouri Firm

OSHA initiated an inspection in October 2010 in response to a report of accidents at the facility, one in which an employee lost fingers in machinery and another in which an employee lost a foot in a forklift incident.

Asbestos fibers can cause lung cancer and other types of serious lung disease in workers when inhaled.

NIOSH Issues Asbestos Roadmap, Recommends More Research

"The NIOSH roadmap outlines a strategic framework for designing, conducting, and applying the research that will best serve the need to address persistent scientific uncertainties about occupational health and elongate mineral particles," said Director Dr. John Howard.

Repeat, Health Violations Add Up to $95,240 in Fines for Georgia Manufacturer

Three violations are health-related, including failing to provide a hearing conservation program, exposing workers to airborne styrene that exceeded the permissible exposure limit, and not providing suitable protective clothing and gloves for employees whose skin was exposed to styrene-containing resin.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars