PPE


Cheese Maker Hit with $111,000 Fine for Anhydrous Ammonia Hazards, More

OSHA cited the company for 12 serious and one repeat violation after an inspection identified two incidents of anhydrous ammonia release, an absence of fall protection, the employer's failure to implement an emergency response plan, and other workplace hazards.

Leather Finisher Fined $105,300 Following Worker's Hand Injury

"This case is a stark example of the devastating consequences to workers when adequate machine guarding is absent," said Edward Jerome, OSHA's area director in Albany.

Arkansas Aluminum Firm Fined $154,000 for Repeat, Health Violations

The safety inspection found 10 serious and five repeat safety violations. A health investigation yielding nine serious violations was opened Nov. 15, 2010, based on a referral from the safety inspection.

OSHA Hammers Lowe's for Electrical, PPE Violations

OSHA proposed $82,700 in penalties for the violations following its inspection, which was conducted based on high injury and illness rates reported at the site.

Washington Passes Bill Regulating Handling of Hazardous Drugs

Without precautions being taken, such as proper ventilation or protective equipment, the preparation, administration, and the disposal of these drugs exposes hundreds of thousands of workers to potentially harmful levels of the chemicals involved.

FDA Clears Single-Use Antibacterial N95 Surgical Respirator

The Food and Drug Administration cleared the SpectraShield 9500 N95 surgical respirator, a device that kills 99.99 percent of three different kinds of bacteria when exposed to its outer surface. The single-use, N95 surgical respirator is designed for use in health care settings by health care personnel to protect against microorganisms, body fluids, and particulate material.

The December 2010 compliance directive said 1926.501(b)(13) would be interpreted as written.

7th Circuit Upholds OSHA Fall Protection Directive

And the panel's reasoning in the April 7 decision offers support for the hearing protection reinterpretation OSHA recently withdrew.

Failure-to-Abate Notices Add Up to $112,530 in Fines for N.J. Firm

OSHA initiated an inspection on Oct. 21, 2011, in response to a complaint alleging that the employer had not abated safety and health violations cited on July 14, 2010.



NIOSH Reaches Twitter Milestone, Wants Nano Input

The National Institute for Occupational Safety and Health's Twitter page has passed 100,000 followers. Until April 15, NIOSH is accepting comments on how to enhance current nanotechnology research.

Products Bearing BioPreferred Labels in Stores Soon

USDA identified the first 60 products independently certified to meet the program's standards for consisting wholly or significantly of agricultural ingredients -- renewable plant, animal, marine or forestry materials. About 400 products have been submitted in the first three months.

Propane Tank Firm Cited Following Forklift Fatality

OSHA cited the company for 19 safety violations following the October 2010 death of a worker who was ejected and crushed after the forklift he was operating overturned.

Trenching Hazards Pile Up $115,000 in Penalties for Ala. Contractor

"A trench can become a grave in seconds. Disregarding workers' safety by leaving them unprotected from potential cave-in and struck-by hazards is unacceptable and will not be tolerated," said Roberto Sanchez, OSHA's area director in Birmingham.

NJ Bearings Manufacturer Penalized $88,200

RBC-West Trenton was investigated under OSHA's Site-Specific Targeting Program, which focuses on industries with high injury and illness rates.

Electrical, Combustible Dust Hazards Add Up to $83,400 in Fines for Volvo Aero

Specific violations cited by OSHA included workers being hoisted on the load hook of an overhead crane, an improperly designed combustible dust collection system, and a lack of personal protective equipment.

Shock-Absorbing Lanyards Can Let You Down

With the reduction in size and weight comes a reduction in price, making PFLs more affordable than ever.

Using Dielectric and Electrical Hazard Shoes

Minute holes in the soles of the footwear are the biggest area of concern in the protection scenarios.

Tyson Foods Cited for LOTO, Respiratory Protection Hazards

The company faces penalties totaling $45,000 as a result of an OSHA inspection conducted in October 2010.

A New Generation of Latex Gloves

Most proteins that can trigger latex allergies can be removed.

Parts made, safety, and employee morale have a significant impact.

Productivity: Small Changes Can Lead to Large Gains

Parts made, safety, and employee morale have a significant impact. A tire manufacturer saved $500,000 from its injury costs the first year.

The group will seek more members from across other disciplines to collaborate on concussion research and testing.

Cooperative Forms to Address Sports Concussions

The group, which includes protective equipment manufacturer Rawlings Sporting Goods, will coordinate concussion research and testing.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars