PPE


Some suits on the market offer certification to both standards. This means a suit for use in situations that do not require a Level A suit, one that also provides liquid splash and gas chemical protection. (Saint-Gobain Performance Plastics photo)

Spending Less and Getting More from Your Hazmat Suit

It is imperative for hazmat teams to understand the requirements of NFPA 1994 and NFPA 1992. Doing this not only determines your safety during use, but also gives peace of mind while in the hot zone.

OSHA Dunks Swimming Pool Firm in Fines Following Worker's Injury

The Hauppauge, N.Y., swimming pool manufacturer faces a total of $106,200 in proposed fines.

The Pennsylvania Convention Center in downtown Philadelphia is the host site for the 2011 National Safety Congress & Expo. (Paul Loftland photo)

All Aboard for Safety

Historic Reading Railroad Terminal is the site of the National Safety Congress & Expo’s long-awaited return to Philadelphia.

Making Sense of Electrical PPE

Remember that ignorance of these regulations will not work as a defense of an OSHA citation or when answering questions in a tort case following an electrocution.

Triple Play

Hazmat handlers need more than just HazCom training. Incorporating required elements from OSHA, EPA, and DOT works well.

Funding Issues Fill FEMSA/FAMA Meetings' Agenda

The joint fall meetings and conference of the Fire and Emergency Manufacturers and Services Association and the Fire Apparatus Manufacturers' Association will take place Oct. 5-7 in Arlington, Va.

Words of Wisdom

When a safety manager explains what PPE he or she is recommending and why, that should be persuasive, says orthopedic surgeon Dr. Gregory C. Berlet, who sees the damage a severe crush injury leaves behind.

OSHA to Take-Out Container Maker: Time for Hazards 'To Go'

Eighteen serious violations include failing to maintain emergency lighting in the warehouse, provide employees exposed to noise hazards with proper training and monitoring, provide written operating procedures for the foam extrusion system.



Horn, Percussion Orchestral Players at Highest NIHL Risk

A study published in the International Journal of Occupational Safety and Ergonomics measured sound pressure levels as four orchestras performed, then estimated the risk of hearing loss for someone exposed over 40 years of employment.

USFA Releases Annual Report on Firefighter Fatalities in U.S.

Eighty-seven on-duty firefighters from 31 states lost their lives as the result of 83 fatal incidents that occurred in 2010.

$949,800 in Fines Issued to Trailer Maker for Toxic Fumes, Noise Hazards

OSHA's Dallas Area Office initiated a safety and health inspection at the company's facility in Texas following receipt of a complaint that employees were not adequately protected from being injured by rotating machinery parts, and employees were exposed to toxic welding fumes while fabricating trailers and noise levels above approved health standards.

Singapore Workplace Fatalities Rise in First Half of 2011

The report highlighted that the number of occupational diseases went up from 124 in 2010 to 361 in 2011, primarily due to the increased reporting of noise-induced deafness cases.

Georgia Lumber Firm Nailed for Chain Saw, Machine Guarding Hazards

Charles Greer Lumber Co. has been cited by OSHA for 18 safety and health violations following an April inspection of the company's plant in Suwanee, Ga. Penalties total $87,780.

Londoners Watch Firefighters Compete

The host London Fire Brigade invited the general public to watch the largest UK firefighter competition of the year and to learn about keeping themselves and others safe from fires.

DOL Sues Dentist for Firing Worker who Complained about Needlestick Hazards

According to the complaint, the employer discharged a dental assistant who raised concerns about an office procedure that required workers to remove protective caps from contaminated needles before putting the needles in disposal containers for sharps.

Cintas Names Top Four Restaurant Injuries

By implementing a first aid program developed with the specific challenges and injuries of a foodservice operation in mind, restaurants can help protect their workers and reduce exposure.

OSHA, NIOSH Release Nail Gun Safety Guide

It says injury prevention is possible if contractors take steps such as using full sequential trigger nail guns, establishing nail gun work procedures, and providing workers with personal protective equipment.

A+A 2011 On Record Pace

A record 1,580 exhibitors have booked 617,800 square feet of exhibit space for the Oct. 18-21 trade show and the Congress for Safety and Health at Work.

Concussions Researcher Wins 'Genius Grant'

Among 22 winners of $500,000, no-strings-attached awards announced Sept. 20 by the John D. and Catherine T. MacArthur Foundation was Kevin Guskiewicz, who has focused his research on sports-related concussions.

October Especially Cruel to Metal, Nonmetal Mines

A Fatal Alert posted by MSHA says this category of mines has experienced more fatalities in October than in any other month during the past 11 years.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars