$949,800 in Fines Issued to Trailer Maker for Toxic Fumes, Noise Hazards

OSHA's Dallas Area Office initiated a safety and health inspection at the company's facility in Texas following receipt of a complaint that employees were not adequately protected from being injured by rotating machinery parts, and employees were exposed to toxic welding fumes while fabricating trailers and noise levels above approved health standards.

OSHA has cited PJ Trailers Manufacturing Co. Inc. and Delco Trailers Co. Inc., a similar company owned by PJ Trailers, for seven willful, 26 serious, nine repeat, and four other-than-serious violations. OSHA inspectors found workers exposed to unguarded machinery, fall hazards, and accumulations of potentially hazardous dust, among other violations. Proposed penalties total $949,800.

"Employers have a responsibility to keep their workers safe and healthy. Willful and repeat citations, as well as significant penalties, reflect the fact that management knew workers were exposed to dangerous conditions yet failed to provide them with basic safety protections. That choice is unacceptable and needlessly placed these workers' health and safety at risk," said Assistant Secretary of Labor for OSHA Dr. David Michaels.

PJ Trailers Manufacturing and Delco Trailers are commonly owned, with the same president and management. They share a worksite, a human resources division, and a safety and health manager, and they have interrelated and integrated operations. The companies previously had been cited by OSHA for many of the same hazards that the agency found during its most recent inspection. Although the company had certified abatement of the prior hazardous conditions, many of the fixes were later abandoned to accommodate production. Since 2008, at least 15 workers have suffered eye injuries requiring medical treatment and or days away from work.

OSHA's Dallas Area Office initiated a safety and health inspection at the company's facility in Sumner, Texas, following receipt of a complaint that employees were not adequately protected from being injured by rotating machinery parts, and employees were exposed to toxic welding fumes while fabricating trailers and noise levels above approved health standards.

The willful violations involve failing to provide fall protection for employees working on stacked trailers, provide adequate machine guarding to prevent "caught-in" or "caught-between injuries," provide employees with proper eye protection during cutting and welding operations, and establish and maintain an audiometric testing program. Audiometric testing is required when employees are exposed to high noise levels to determine if their hearing is being adversely affected.

Repeat violations include failing to ensure that all spray booth areas were kept free from accumulated powder coating, guard several pieces of hazardous machinery, have all necessary lockout/tagout procedures, provide training on existing lockout/tagout procedures to protect employees from hazardous machinery starting up unexpectedly, and ensure that medical evaluations were completed to determine employees' ability to use respirators. OSHA cited the company in September and October of 2006 and March 2010 for similar violations.

Serious violations include failing to provide required fall protection, provide training on electrical hazards, and prevent exposure to welding fumes in excess of the average allowed during an 8-hour shift.

Other-than-serious violations include failing to enter recordable injuries and illnesses on the OSHA 300 log within seven calendar days and properly certify the OSHA 300A form or its equivalent.

The workers' compensation carrier insuring PJ Trailers and Delco Trailers is Farmington Casualty Co.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence