PPE


OSHA Blasts W.Va. Welding Firm for 25 Safety Violations

"Workers at this welding shop are left vulnerable to hazards that could cause serious injuries or even death," said Prentice Cline, director of OSHA's Charleston Area Office.

Honeywell's 3Q Sales: $9.3 Billion

Earnings per share of $1.10 are 45 percent above 76 cents a year earlier. Sales rose by 14 percent for the company as a whole and also for the Automation and Control Solutions segment.

Supermarket Chain Faces Heavy Fines

Thirty violations and $589,200 in proposed fines against DeMoulas Supermarkets Inc. stem mainly from "recurring fall and laceration hazards" and from "improperly responding to a worker's serious injury," according to OSHA.

$147,840 in Fines Issued to Steel Firm for Unsafe Crane Operations

OSHA issued the company a willful safety violation for failing to remove a crane from service that required necessary repairs before resuming crane operations.

Ontario Labor Ministry Launches PPE, Mine Ventilation Blitzes

Mine inspectors are checking underground mines with large fleets of diesel equipment, while the PPE blitz targets health care workplaces, among others.

Buy Quiet Workshop Set for Nov. 9-10

The NIOSH event in Cincinnati is intended to encourage greater use of engineering noise controls by construction and manufacturing employers.

Grainger Posts Record 3Q, Raises Earnings Guidance

The giant distributor reported $2.1 billion in sales for the quarter, 11 percent better than a year earlier. Heavy manufacturing led U.S. sales 7 percent higher.

ISEA Releases New Fall Protection Guidance Documents

Prepared by manufacturers in the ISEA Fall Protection Group, the use and selection guide describes the process of developing a corporate fall protection program and explains the components of fall protection systems.



A+A Sets New Attendance Record

More than 60,000 trade visitors toured the exhibit halls at the Dusseldorf fair grounds during the Oct. 18-21 trade fair. Exhibit square footage also is up 12 percent for the National Safety Council's Congress & Expo two weeks from now.

Hexavalent Chromium Hazards Lead to Manufacturer's $90,000 Fine

Seventeen serious safety and health violations were cited. Those related to hexavalent chromium include failing to prevent exposure beyond OSHA's authorized limits and not developing a plan to limit exposure.

OSHA Busts Lab Equipment Maker for 29 Safety Violations

Proposed penalties total $122,000 following an inspection initiated as part of OSHA's Site-Specific Targeting Program for industries with high injury and illness rates.

NIOSH Releases Materials on Call Center Noise Hazards

NIOSH research shows that workers at call and dispatch centers may face several hazards, including acoustic trauma from a sudden spike in noise levels and background noise from an incoming call.

OSHA Releases New Materials on Laboratory Safety

Practices and precautions to protect laboratory personnel include safety guidance for using autoclaves, use of chemical fume hoods, labeling and transferring chemicals, and latex exposure.

Lowe's Nailed for Repeat Violations at Three Pennsylvania Stores

The inspections were conducted under OSHA's Site-Specific Targeting Program for industries with high injury and illness rates. Proposed penalties total $96,030.

Masonry Contractor Nailed for Repeat Violations at Two Worksites

OSHA's inspections were initiated under a regional emphasis program aimed at preventing injuries and deaths caused by falls. Proposed penalties total $164,120.

DuPont Opens Expanded Cooper River Kevlar Plant

"As the global population grows, there will be even more critical need for protection materials to keep people safe and to protect the environment, structures and critical processes," said Thomas G. Powell, president of DuPont Protection Technologies.

Now Hear This: 'Feasible' Stakeholder Meeting Announced

When OSHA withdrew its proposed reinterpretation of “feasible administrative or engineering controls” to prevent hearing loss, it promised to convene a stakeholder meeting. That meeting will take place Nov. 3.

Hazardous Waste Tanks Lead to Firm's $122,760 Fine

OSHA inspectors found that workers were exposed to respiratory and confined space hazards while cleaning waste tanks used to store petroleum hydrocarbons at a job site in Channahon, Ill.

OSHA Puts the Brakes on Wheel Repairer's Safety Hazards

OSHA inspectors found that workers at the company's site in Schertz, Texas, were repairing vehicle wheels using welding equipment that was not properly guarded and without the use of required personal protective equipment.

October 2011

Intelligent Hearing Protection: A Primer

Bottom line, it is best to find a solution that strikes the appropriate balance between hearing protection and situational awareness.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars