PPE


OSHA Floors Tile Company with $318,000 Fine

American Marazzi Tile Inc. has been issued 25 safety and health violations for exposing workers to excessive noise levels, machine guarding hazards, and other conditions.

N.Y. Felt Firm Fined $146,300 for Crushing, Machine Hazards

"Left uncorrected, these hazards expose employees to possible electrocution, crushing, and struck-by injuries, being caught in moving machine parts, hearing loss, falls, eye and hand injuries, asbestos, and lead," said Arthur Dube, OSHA's acting area director in Albany.

Hostess Production Plant Penalized for Exit, Machine Hazards

The company, which manufactures Hostess products, faces a total of $104,700 in proposed fines following a safety inspection by OSHA's Augusta Area Office.

Gloves in Arc Flash: A Big Change in NFPA 70E

Some gloves can be more of a hazard than a help in an arc flash situation.

Ignite sessions at AIHce are five-minute presentations for which AIHA is still taking suggestions.

Filling Your 2012 Conference Calendar

Three of the year's big trade shows take place in Denver, Indianapolis, and Orlando. It's not too early to make plans or to register for some of them and for other must-attend events.

This photograph shows the installation of a voltage indicator and voltage portals in a typical three-phase panel.

Using Permanent Electrical Safety Devices

Electrical safety radically improves when workers can determine a zero electrical energy state without any voltage exposure to themselves.

International Asbestos Awareness Conference Slated for March

Conference presentations will include advances in diagnosing and treating asbestos-related diseases, preventing asbestos exposure in the home and workplace, patient resources, and a global advocacy session.

Rubber Parts Fabricator Fined $77,600 for Plethora of Violations

OSHA opened inspections in July after receiving complaints alleging burn hazards and poor housekeeping throughout the plant.



Houston Recycling Plant Penalized for Exposing Workers to Hazardous Substances

OSHA began its investigation in August in response to a complaint, and found workers exposed to sulfuric acid and caustic soda while recovering silver from X-ray film and processing plastics for recycling. Proposed penalties total $144,760.

New OSHA Web Page Offers Winter Hazards Guidance for Workers

The page includes guidance for workers clearing heavy snow in front of workplaces and from rooftops, workers encountering downed power lines or traveling on icy roads, and utility workers restoring power after winter storms.

NIOSH Releases Roster Summary Report on Deepwater Horizon Response Workers

The work from which the report was drawn marks the first time that NIOSH has developed a prospective, centralized roster of workers for a response event of this magnitude.

Missing Safety Gear Cuts Vessel's Voyage Short

A boarding team found the crew of the Still Mis Behavin did not have the required number of fire extinguishers or safety flares, the life raft was not mounted in the proper location, and the emergency position indicating radio beacon had expired.

Worker Injured by Falling Piece of Steel, Ohio Firm Fined $54,600

An inspection was initiated July 22 after a worker sustained a serious injury to his left arm caused by a piece of falling steel when a lifting magnet malfunctioned and dropped a load weighing approximately 2,900 pounds.

NIST Study Pinpoints Firefighting SCBAs' Vulnerability

The agency conducted fire experiments in vacant but furnished townhouses with results covered in a report about the damage to facepieces caused by "uncovered temperature and heat flow conditions," it said.

OSHA Busts Colorado Food Manufacturer for 28 Safety Violations

OSHA has cited the company for seven repeat, 18 serious, and three other-than-serious violations. Proposed fines total $116,160.

HELP Committee Taking Up Pandemic Bill This Week

S. 1855, the Pandemic and All-Hazards Preparedness Act Reauthorization of 2011, a reauthorization to build on the 2006 law that strengthened public health preparedness for a pandemic, is included in the U.S. Senate Health, Education, Labor and Pensions Committee's Dec. 14 executive session.

Put Safety First When Cutting Christmas Trees: USFS

The Forest Service sells permits allowing individuals to cut one fresh tree on national forest lands. Following its tips means a safe, happy experience.

MNOSHA Weighing Comments on Window Washing Rule

Only six comments were submitted by the Nov. 30 deadline, and too few requests came in to hold a public hearing, said Carrie Rohling, rules coordinator for the Minnesota Department of Labor and Industry.

FRA Advisory Reminds Workers, Railroads About Fall Protection

It was prompted by three incidents, including a September 2011 fatality in Havre de Grace, Md., as a team of workers replaced ties on a bridge over the Susquehanna River.

OSHA Serves $122,200 in Fines to Kitchen Cabinet Maker

OSHA initiated an inspection as part of the agency's National Emphasis Program on Amputations that found one repeat, 25 serious, and four other-than-serious violations.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars