PPE


This pictogram represents chemicals that cause skin corrosion or burns, eye damage, or that are corrosive to metals.

5 Tips for Managing the Messy Transition to GHS

Safety professionals are finding that the more time they spend with the revised standard looking at training, the more questions they have about GHS adoption in general.

Fall Protection Violations Land Contractor in SVEP

KG Framing and Construction LLC has been cited six times for this, according to OSHA.

NIOSH Developing Free Mobile Pocket Guide

This will make the agency's most popular document a true pocket guide, one commenter observed. NIOSH officials want feedback from users to help them decide how to organize the content.

OSHA Releases Booklet for Responders Encountering Combustible Dust

It outlines best practices for pre-incident operational preparation by emergency responders, Assistant Secretary Dr. David Michaels said.

Each monorail uses dual track, allowing two workers to pass each other safely without disconnecting the lanyard from their harnesses. (Gorbel Inc. photo)

Solving a Truck Loading Challenge

Bristol Metals explored several solutions and found a way to maintain an effective loading process while creating a safer work environment.

In addition to safety standards, there are numerous components of work boots that impact their comfort and functionality. (Wolverine photo)

Proper Foot Protection Made Simple

Consider these important factors for safety and comfort.

Be honest: How consistent is correct glove use at your facility? Perhaps 35 percent? Maybe 70 percent? As safety, you have to know. (Superior Glove photo)

Keep a Firm Grasp on Proper Glove Use

Consider an ergonomic assessment. You may be surprised at the changes that can be easily made in positioning, workstation design, tool use and selection, and vibration control.

Challenges to Leather Glove Quality

With higher prices likely to be unavoidable in the long run, the key is to stick with brands one trusts.



Why Is Skin Care Important in an Industrial Environment?

By taking the right preventative steps to minimize contact with damaging agents and adopting an appropriate skin safety regimen, the risk of occupational dermatitis can be reduced.

NIOSH Planning to Raise Respirator Certification Fees

The agency has scheduled a public meeting April 30 so allow respirator manufacturers and other stakeholders can comment on the impact of the increases.

NIST Tests Find Few Green Lasers Meet Federal Regulations

Laura Ost reports nearly 90 percent of the 122 tested green hand-held lasers and 44 percent of red ones were out of compliance.

Only 28 Countries' Traffic Laws Cover All Key Risk Factors

And these states have only 7 percent of the world's population, the World Health Organization reported March 14.

OSHA Cites Poultry Processor After Grisly Fatality

A worker died when he slipped and fell into an unguarded screw conveyor while cleaning it last September in the plant in Moselle, Miss. Now, OSHA has assessed 37 serious violations against Southern Hens Inc.

No Reliable Test for 'Latex-Free' Claims: FDA

The agency has issued a draft guidance document urging manufacturers that want to indicate natural rubber latex was not used as a material instead use the statement on the product label, "not made with natural rubber latex."

286,000 Garlic Slicers Recalled

The Pampered Chef of Addison, Ill., is recalling them because the blade can detach and poses a laceration hazard.

Here's One Sweet Hard Hat

"By developing a hard hat sourced from sugar, we have reduced the overall carbon footprint that's associated with the entire life-cycle of this particular product, from start to finish," said Eric Beck, MSA's global director of Strategic Marketing.

IAEA Board Holding First 2013 Meeting

The Board of Governors is meeting March 4 at the agency’s headquarters in Vienna, Austria, with a variety of safety issues on its agenda.

John Fischer, CSP, vice president of SVS Safety, ofen sees the problem of heat-induced eyewear fogging. (Defog It by Nanofilm photo)

Hot Weather and Safety Eyewear: A Closer Look at the Hazards

Even a worker in dry-as-a-bone Phoenix perspires more in the heat, which increases the moisture right behind the safety glasses and increases the prospect of fogging.

The Orange County Convention Center in Orlando, Fla., frequently hosts major safety and health conferences.

... and Conference Season Begins

Health care and human factors are in the spotlight in March and April, with AIHce 2013 and Safety 2013 following close behind.

Four Steps to Protection

We have Frank run the machine during the morning hours and Jim run it in the afternoon. We have not cut down the noise of the machine, but we've cut their noise exposures in half.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars