PPE


OSHA Interpretation: Not All Firefighters have HAZWOPER Clearance

"Personnel trained to the first responder awareness level may make an effort to identify hazardous substances, but they must do so from a safe distance," wrote Richard E. Fairfax, director of OSHA's Directorate of Enforcement Programs.

OSHA Clarifies Training Requirements for Tattooists

An explanation of the use and limitations of methods that will prevent or reduce exposure to bloodborne pathogens and OPIM, including appropriate engineering controls, work practices, and personal protective equipment, should be included in the training.

Prevent Blindness Offers New Program to Businesses

Fewer work-related eye injuries, less absenteeism, and lower health benefit costs are only a few of the benefits participating companies may get from the program, PBA says.

NIOSH Proposes New Respirator Quality Assurance Requirements

The National Institute for Occupational Safety and Health has proposed new quality assurance and control requirements for manufacturers of respirators approved by NIOSH or NIOSH and MSHA under 42 CFR Part 84--Approval of Respiratory Protective Devises.

Updates on Safety Equipment PPE Certification Activity

In the midst of changes taking place throughout the health care industry, many OHNs are rightly feeling they are in a whole new profession, which helps explain why organizers of this year's annual AAOHN conference have for months now been plugging the event with the tagline "It's a Whole New Symposium."

arc welding

Living with Arc Welding Spatter

Welding spatter can cause equipment problems, weld quality problems, fires, and burns. This article will help you reduce costs, improve weld quality, and be safe.

PPE: A Retrospective

Personal protective equipment is an acceptable and often required tool in many of today's workplaces, but this wasn't always so. The acceptance of PPE traveled down a long and perilous road that was paved with the toil and sacrifice of many workers.

a mine inspector at work

MSHA Offers Eye Protection Video

This free video from Peabody Coal Co. explains the importance of vision protection to prevent injuries among mine personnel.



Coping with the NRR Change

For years, we’ve known many workers in the “real world” do not achieve the same amount of attenuation from hearing protectors as indicated on the EPA required Noise Reduction Rating (NRR) label. Numerous studies show the NRR greatly overestimates the amount of attenuation that workers get in the field. This problem is so widely accepted that OSHA recommends de-rating the NRR by 50 percent. However, studies also show that a one-size-fits-all de-rating is also inaccurate when compared to individual measures of attenuation. EPA will soon make an announcement proposing a major change in the required labeling and method of testing of hearing protection devices (HPDs).

Free 2009 Electrical Safety Workshops Begin March 2

The Workplace Safety Awareness Council begins a series of electrical safety and arc flash training classes on March 2 that includes stops in 33 cities. A Susan Harwood grant from OSHA funded the development and presentation of the series.

Ensuring Effective HCPs

It’s late in the afternoon on a Friday at International Meta-Multi-Mega Manufacturing Inc.’s corporate headquarters, and Bill, the manager of Safety, Health and Environmental Services, is on the hot seat regarding management’s latest concerns about compensation liability. The director of Finance, Samantha, is anxious to get some answers. The HR manager, Hector, nods in agreement.

Sheet Metal Fabricator Faces $273,000 in Fines for Asbestos Hazards

"The sizable fines proposed here reflect the fact that this company knew several of these critical safeguards were necessary yet chose not to provide them," said Arthur Dube, OSHA's area director in Buffalo, N.Y.

DPA to 'Blaze a New Trail' with Safety Summit in Tucson

"Suppliers exhibit behind their tabletop booth, and after 15 minutes are up, each DPA member rotates to the next booth in their rotation order. You really accomplish a lot by the time the conference is over," said DPA Executive Director Zachary Haines.

Alabama Auto Parts Plant Cited for Lockout/Tagout Failures

In addition, one of the plant's maintenance providers has also been cited, in part for failing to adequately train employees to fight fires, which it contracted to do at the site.

OSHA Fines St. Louis Chemical Company $1.2 Million

Eight of its workers were treated for exposure to the organic chemical para-nitroaniline (PNA) in powder form. The penalty is based on 21 alleged willful citations, 20 of them cited on a per-employee basis.

NEP Unearths Trenching, Excavation Hazards in Arkansas

An investigation found alleged willful violations in the construction company's failure to provide training in avoiding hazards associated with working in trenches eight feet deep or more and failure to provide a means of egress while employees are working at excavation worksites that are four feet deep or more.

a lightning bolt

Electrical Safety at Center Stage Next Month

PowerTest 2009 will bring the testing and maintenance industry together on the San Antonio Riverwalk for the March 9-12 event hosted by the InterNational Electrical Testing Association (NETA).

Safe Handling Awareness Month to Focus on Exposure to Hazardous Drugs

A free, one-hour safe handling CE webinar on the subject is planned for April 20--the inaugural Safe Handling Awareness Day--and all health care professionals are invited to participate.

NATE to Launch '100% Tie Off' Campaign for Tower Erectors

Members attending the annual conference will be asked to individually pledge to make 100 percent tie-off a reality in the industry. They also will be asked to sign a petition to stop further delays in the DTV transition.

Product Showcase

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence

Webinars