PPE


Inadequate Process Safety Cited in $202,000 Penalty against Refinery

"The identified violations leave employees at the refinery vulnerable to accidents that could result in injury or possible death," said Al D'Imperio, area director of OSHA's Philadelphia Office.

a homes rooftop solar panels will not support the weight of ladders, equipment, or firefighters

Green Power Getting Attention of Firefighters, IBEW

The union provides training for jobs in solar, wind, biomass, nuclear, and clean coal, while firefighters are discussing how to work around solar panels, wind turbines, and other renewable energy systems in homes where they are responding.

DuPont Creates New Personal Protection Division

“We are tremendously excited about the opportunities created for our people and our customers by combining these businesses,” said the unit’s new VP and General Manager Thomas G. Powell, remarking on the internal merging and reorganization.

Survey: Nearly Half of Eye Injuries Occur at Home

Home remains the more dangerous place to suffer an eye injury, according to a survey conducted by the American Academy of Ophthalmology and the American Society of Ocular Trauma.

Coast Guard: Weekend Marks Busiest, Deadliest Boating Period

"Your chance for survival usually comes down to one thing: having your life jacket on when you need it," said USCG's Al Johnson. "The misperception persists that you can put on a life jacket once you’re in the water. It is extremely difficult to do, and unfortunately for most people immobilized by the shock of sudden immersion, it can be tragically impossible."

DOL Doles Additional $7.9 Million to Texas for Continued Ike Clean-up, Recovery

The National Emergency Grant funds will increase the overall approved number of participants in the temporary work program from 600 to 767 and extend the project through Dec. 31, 2009.

Tailgate Training Card 10: Heat Stress

This California Department of Public Health training aid says the best way to prevent heat stress is to keep your body cool by drinking plenty of water and taking breaks to cool off when needed.

June 2009 Myth of the Month

Britain's Health and Safety Executive set the record straight last month on the question of wearing flip-flops to work.



Stepping Beyond Organizational Tripups

One of leadership's biggest blockages is failing to acknowledge real problems. It's easier for some to focus on issues of which they think they have control rather than tackle longstanding, seemingly insolvable, obstacles.

Use a Scientific Approach to Prevent Slips and Falls

A written and enforced floor safety policy and procedures guide will improve floor safety while demonstrating management's commitment to prevention. Slip-resistant footwear is part of the solution.

Case Study: Putting the Brakes on Slips & Falls

G4S Wackenhut tried out a new slip-resistant shoe with about 800 security officers at two offices in Cincinnati and Fort Myers, Fla., early this year. Asked April 28 how the trial was going, Director of Safety Frank Knapfel said the results were excellent at that point in the trial.

This photograph shows signage indicating the area may have hydrogen sulfide hazards.

Oil and Gas Drilling Rig Hazards

With rigs in use in many non-traditional areas, emergency responders and company health and safety professionals must work together.

Worker Safety Series: Construction Pocket Guide

OSHA Publication 3252-05N, offers assistance with construction hazards of all kinds. Some of its contents concern protective footwear and the requirements for equipping workers properly when they may be exposed to hazards.

ASSE Honors Members for Promoting Safety at Work Message

The American Society of Safety Engineers presented members from Hawaii, Indiana, Maryland, Oklahoma, Oregon, and Washington yesterday for their help and volunteers during May's North American Occupational Safety and Health (NAOSH) Week, May 3-9, 2009, and Occupational Safety and Health Professional (OSHP) Day, May 6, 2009.

Jack Welch, keynote speaker for SHRMs 2009 annual conference

ASSE vs. SHRM: Who Wins Their June 28-July 1 Smackdown?

Going head to head in two sizzling destination cities this week are the annual conferences of the American Society of Safety Engineers (San Antonio, featuring Labor Secretary Hilda Solis) and the Society for Human Resource Management (New Orleans, featuring business titan Jack Welch).

CSB to Begin Chemical Release Reporting Rulemaking

The agency wants comments by Aug. 4 on how it should write a rule that will require accidental chemical releases to be reported to it or to the National Response Center.

Kodachrome Gallery Showcases American Industry

Fortune magazine’s color photography display begins with three Burnham, Pa. steel workers in 1939 and ends with a 2002 shot of a billboard in Shanghai. It chronicles both the demise of Kodak's Kodachrome film and big changes in the U.S. economy.

inside a prison

NIOSH Lists Best BBP Practices for Correctional Health Workers

The agency posted the information Tuesday to help this group of workers and their managers address bloodborne pathogens exposures.

Baton Rouge-Based Employers Face $112,000 Fine for Asbestos-Related Charges

Three separate companies were issued willful violations for failing to provide a competent person to supervise the removal of a ceiling that contained asbestos, to provide the required respiratory equipment, and to inform workers that the worksite contained asbestos.

NY Textile Plant Cited for Potential Asphyxia, Amputation Hazards, Other Violations

"These citations encompass a cross section of fall protection, flammable, confined space, lockout, and bloodborne pathogen hazards as well as inadequate personal protective equipment and hazard communication training," said Edward Jerome, OSHA's area director in Albany, N.Y.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars