Facility Management


OSHA Proposes $364K in Penalties for Dollar Tree After Inspection

OSHA Proposes $364K in Penalties for Dollar Tree After Inspection

Among the hazards found at the store were slip, trip and fall and fire hazards.

TJX Companies Inc. Cited After OSHA Finds Hazards at Georgia TJ Maxx

TJX Companies Inc. Cited After OSHA Finds Hazards at Georgia TJ Maxx

In total, the company was cited for two repeat violations and one serious violation.

Inspectors Find ‘All-Too-Familiar’ Violations at Ohio Dollar General

Inspectors Find ‘All-Too-Familiar’ Violations at Ohio Dollar General

OSHA cited the store for four repeated violations.

New NIOSH Study Questions Non-Healthcare Workers on COVID-19 Exposure at Work

New NIOSH Study Questions Non-Healthcare Workers on COVID-19 Exposure at Work

One in five respondents said they were exposed to COVID-19, according to the study’s findings.

Greater Profitability and Worker Safety with Visual AI

Greater Profitability and Worker Safety with Visual AI

Using visual AI with CCTV cameras can turn the technology into a proactive analytical asset.

Why Accurate Inventories Matter for Health and Safety

Why Accurate Inventories Matter for Health and Safety

In the brewing industry, inventory accuracy can help keep workers safe.

Two Washington Dollar Tree Stores Face Almost $55K in Combined Fines

Two Washington Dollar Tree Stores Face Almost $55K in Combined Fines

The fines were issued for blocked electrical panels and stacked boxes that were “perilously close to collapsing,” the state’s Department of Labor & Industries said.



Protecting Data is Essential to Worker Safety

Episode 176

Protecting Data is Essential to Worker Safety

In this episode, Editor Sydny Shepard discusses how protecting employee data is essential to worker safety.

Microbial Growth During Handling, Packaging, Shipping and Storing Contents

Microbial Growth During Handling, Packaging, Shipping and Storing Contents

Packers, shippers and movers can protect themselves from visibly microbial contaminated goods.

Foundry Worker Suffers Fatal Burns After Falling into Equipment

Foundry Worker Suffers Fatal Burns After Falling into Equipment

The foundry’s operator was cited for one willful violation after the worker’s death.

After Mezzanine Collapse in Boston, Two Contractors Face Citations and Proposed Penalties

After Mezzanine Collapse in Boston, Two Contractors Face Citations and Proposed Penalties

The collapse caused one worker to lose their legs and two others to be injured.

MA Roofing Contractor Cited for Fifth Citation Related to Falls in Eight Years

MA Roofing Contractor Cited for Fifth Citation Related to Falls in Eight Years

OSHA cited the company for four willful and two serious violations and proposed penalties totaling $137,196.

Staying Up to Date: How NFPA is Digitizing Codes and Standards

Episode 174

Staying Up to Date: How NFPA is Digitizing Codes and Standards

Editor Sydny Shepard sits down with NFPA LiNK Director Kyle Spencer to talk all about NFPA’s inspiration for LiNK, recent updates to the program and the future of digitization at NFPA.

The Effects of Mold on Workers and How to Keep It Out of Your Workplace

The Effects of Mold on Workers and How to Keep It Out of Your Workplace

The presence of mold at work can cause negative health effects for some workers.

Making the Right Choice: NIOSH Suggestions for Avoiding Counterfeit Respirators

Making the Right Choice: NIOSH Suggestions for Avoiding Counterfeit Respirators

When you're purchasing respirators off a website, there are important elements to be on the lookout for.

Washington State Lifts COVID-19 Emergency Orders

Washington State Lifts COVID-19 Emergency Orders

Even though the emergency orders ended last week, employers should not stop protecting their workers from COVID-19.

New Report Outlines Concerns EHS and EGS Professionals Face Today

New Report Outlines Concerns EHS and EGS Professionals Face Today

A new research report from Intelex Technologies uses responses from 450 EHS and ESG professionals.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. 3

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm 3

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! 3

Featured