Top Stories


The updated OSHA regulation creates a unified and up-to-date set of requirements to help employers more effectively establish safe work practices to protect their workers.

Significant Revisions to OSHA 29 CFR 1910.269

The updated regulation creates a unified and up-to-date set of requirements to help employers more effectively establish safe work practices to protect their workers.

Whatever type you choose, be sure the safety eyewear at your site stands up to the variety of impact hazards present. (Honeywell Safety Products photo)

Tips for Protecting Construction Workers' Eyes in the Summer

Many workplaces implement guidelines above and beyond OSHA's for the types of eye protection to be used based on the specific hazards that are present.

The study showed that the more actively a location participated in recognizing performance-based criteria (by distributing points for achieving specific metrics and best practices), the better they achieved in outcome-based criteria, which measured overall compliance with Standard Operating Procedures and also as compared to overall review of safety logbooks.

Safety Incentive Programs Work

The active use of the program by successful teams suggests that acknowledgement is critical to the success of these programs.



All employers, employees, and contractors within all three segments of the oil and gas industry (upstream, midstream, and downstream) are responsible for ensuring safe and healthful work sites.

Keeping Oil and Gas Workers Safe and Avoiding Costly Penalties

Exposures to hazards present in the oil and gas well drilling, servicing, and storage industry are addressed in specific standards for general industry.

​3M Seeking All Scholarship Winners

The company's not in touch with many of the past winners of its annual scholarships and wants to hear from all of them in time for 2016's 30th year of the scholarship program.

Medical Director Discusses 10 Ways to Leverage EH&S Collaboration at AIHce

Peter Greany of Work Care, Inc. gave his top ten list of ways to leverage collaboration with occupational health professionals.

NTSB Asks Pilots to 'See and Be Seen' in the Air

The agency issued a safety alert reminding pilots to look out for other aircraft and to make their presence known.

NHTSA Urges 15-Passenger Van Users to Check Tires

The NHTSA says tire safety is especially important for 15-passenger van users.

DOL and FAR Council Propose Guidance, Rule to Implement Fair Pay Order

A 60-day public comment period will follow publication.

Machine Guards May Have Prevented Arm Amputation

Griffin Lumber & Hardware received a willful violation from OSHA, which said the company ignored hazards.

OSHA and Health Canada plan to come up with a common label and SDS to help stakeholders comply with their Hazard Communication standards.

OSHA Working with Health Canada on GHS Alignment

The agencies plan to implement a system allowing the use of one label and one safety data sheet that would be acceptable in both countries.

OSHA Cites Contractor in Demolition Fatality

OSHA has cited Formica Construction Co. Inc. of Port Richmond, N.Y., for three willful, three serious, and one other-than-serious violation of OSHA standards with proposed fines of $121,000.

NSC Reports Traffic Deaths Have Increased for Six Consecutive Months

The trend is expected to continue as summer arrives.

Maryland State Police Made 9,500 Memorial Day Stops

Troopers' traffic enforcement efforts during the four-day Memorial Day weekend resulted in more than 9,500 vehicles stopped, with approximately 6,843 traffic citations and approximately 4,764 warnings issued.

Boeing forecasts global demand for commercial airline pilots to top 700,000 during the next 20 years. Airbus

FAA Announces Pilot Fitness Study

A joint FAA and industry group called the Commercial Aviation Safety Team recommended the study based on two recent major losses, the disappearance on March 8, 2014, of Malaysia Airlines Flight MH370 and the apparently deliberate crashing of Germanwings Flight 9525 in the French Alps by its co-pilot on March 24, 2015.

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars