Top Stories


Five Ways to Keep Contractors Safe

Deborah A.P. Hersman, NSC's president and CEO, said 14 participating companies "share how they have placed safety at the heart of every project. Their experiences can help other employers establish safe contract relationships that run the gamut, from delivering mail to major construction projects."

Roof Cleaning Company Fails to Provide Fall Protection: OSHA

Ned Stevens Gutter Cleaning and General Contracting Inc. has been fined $108,200 by the agency.

The new hospital safety-related website

ACA Cutting Hospital Deaths, Report Shows

The reduction came about partly because of the ACA, which prioritizes efforts to prevent these infections, including through Medicare payment incentives to improve the quality of care and the HHS Partnership for Patients initiative.



FMCSA Issues Final Rule to Stop Driver Coercion

The rule is intended to protect truck and bus drivers from being forced by their employers or others to violate hours of service of safety regulations.

It was expected that participants who had the higher levels of training would be better able to adjust their gait patterns in advance of a slip or a trip. (Edward P. Fitts Department of Industrial and Systems Engineering, North Carolina State University photo)

The Importance of Worker Knowledge in Slips, Trips, and Falls and the Utility of Virtual Reality-based Locomotion Research

Virtual reality interfaces have the potential to be useful in gait/locomotion research and training, particularly for scenarios focusing on the risks of slips and trips.

Rutgers Opens Food, Nutrition and Health Center

"Overall, our mission is to make New Jersey that healthy state and a model for the nation. We believe that now is the time, and the institute is the place, to build a culture of health in our society," says Peter Gillies, Ph.D., founding director of the New Jersey Institute for Food, Nutrition and Health.

Incidents involving floor contaminants (wet or dry) aren

Review Floor Maintenance Procedures to Reduce Slip and Fall Incidents

Incidents involving floor contaminants (wet or dry) aren’t isolated to entrances or production areas.

The primary objective of outerwear in cold weather is to provide warmth. However, sub-zero work have the potential for exposure to an electric arc or a flash fire event.

How to Stay Safe and Stay Warm This Winter

The primary objective of outerwear in cold weather is to provide warmth. However, many sub-zero temperature industrial workplaces also have the potential for exposure to electric arc or a flash fire event.

The rule states that before an employee enters the space, the internal atmosphere must be tested with a calibrated direct-reading instrument for oxygen content, for flammable gases and vapors, and for potential toxic air contaminants.

Atmospheric Testing and the New OSHA Construction Confined Spaces Standard

Subpart AA of 29 CFR 1926 will help to prevent construction workers from being hurt or killed by eliminating and isolating hazards in confined spaces at construction sites.

Corvallis, Ore.-based VDOS Global uses aerial robotics and remote sensing to provide oil and gas inspections, environmental research, aerial surveying and other services using for its clients around the world. (VDOS image)

FAA Releases Drone Safety Checklist

With retailers busily advertising drones as a hot gift idea, the agency is urging consumers to make it a stocking stuffer this year.

Identifying employees who understand the duties and responsibilities of a first responder and who are seriously committed are key to your recruiting success and building a higher-performance response team that can execute under extreme pressure.

#1 Priority When Disaster Occurs: Everyone Goes Home

When an amazing safety-first culture exists, the result is a waiting list of employees wanting to be on the emergency response team.

Train all workers about the hazards and about maintaining clearance from overhead power lines.

Understand the Dangers of Electrical Shock

Electricity is one of the most common causes of fires and thermal burns in homes and workplaces.

The amount of exposure to individuals can depend upon work practices, ventilation, and location.

Welding Safety and Health Considerations

The amount of exposure to individuals can depend upon work practices, ventilation, and location. Will the work be done in wide open areas, inside a building adjacent to other work processes and people, or potentially even in a confined space?

Like bloodborne pathogens, hazardous chemicals can be present throughout a health care facility. Although it takes time to check each department, room, and closet, it really is one of the most effective ways to find materials that may otherwise be missed.

Health Care Hazmats: There's More On Site Than Just Bloodborne Pathogens

Sanitizing, disinfecting, and cleaning chemicals are likely to be found throughout the facility. It is important to know the particular brands and styles that are being used to verify that proper precautions are being taken.

Once a fabric has been manufactured, it should be inspected and tested for quality assurance and to ensure that the fabric meets or exceeds the ASTM and NFPA standards for flame resistance. (Mount Vernon FR photo)

Vertical Manufacturing of Flame-Resistant Cotton and Cotton-Rich Fabrics

Wear trials can help guide you in selecting the right fabric by providing a more comprehensive evaluation of important factors such as performance, comfort, and applicability.

Product Showcase

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

Featured

Artificial Intelligence

Webinars