Top Stories


Dry Media Dust Collectors vs. Wet Scrubbers: Two Technologies for Combustible Dust Control

At first glance, wet scrubbers may appear to be preferable because they inherently control the combustibility of a dust.

Do consider using SMART goals in training program implementation. In addition to SMART goals, stronger training programs may also address a behavior change and/or enhancement and establish behavioral objectives.

Best Practices for Engaging Workers in Health and Safety Training

Provide relevant consequences. Consequences will assist in showing your workers what is in it for them.

Figure 1. Organizations that create a culture of safety by incorporating senior leaders, a facility coordinator, an emergency response team, and the general workforce into their emergency response plans have a much higher rate of success when responding to emergencies.

Is Your Emergency Response Plan a Living System or Just Gathering Dust?

Use these practical tips and best practices to create and maintain an effective emergency response plan. Frequent practice drills are essential.



Many companies incorporate a wear trial into their process for selecting FR apparel. Both Lippert and Zumstein cautioned that a hazard risk assessment is a necessary step to take before conducting a wear trial. (Glen Raven Technical Fabrics, LLC photo)

Lasting Protection

A hazard risk assessment is a necessary step to take before conducting a wear trial. Only when the risk assessment is completed should the customer conduct a wear trial of fabrics that will meet the anticipated energy levels.

The OSHA/NIOSH toolkit contains an appendix that is an editable document any hospital can use to draw up its respiratory protection program.

Essential Precautions for Health Care, General Industry

CDC's Healthcare Infection Control Practices Advisory Committee divides ATDs into those two categories, diseases requiring Airborne Precautions and diseases requiring Droplet Precautions.

Although the dangers posed by smoke and toxic gases have increased over the years, gas detection devices are keeping pace with new features to protect firefighters and first responders. (Industrial Scientific photo)

Where There's Smoke . . .

Even if we can't stop the production of deadly gases during a fire, we can take precautions to protect ourselves.

Republic Steel Exposed Workers to Hazards Despite Agreement: OSHA

The steel bar manufacturer now faces $121K in fines.

This photo shows some of the first waste being disposed at the WCS Federal Waste Disposal Facility in Andrews, Texas. It opened in June 2013 for disposal of Class A, B and C Low-level Waste and Mixed Low-level Waste, with a licensed capacity of up to 26 million cubic feet. (WCS photo)

Texas Firm Bids for Spent Nuclear Fuel Repository

Waste Control Specialists LLC announced April 28 it has filed an application with the NRC to build and manage a Consolidated Interim Storage Facility.

Statoil Grounds Helicopters After Crash

At least 11 people aboard died in the April 29 crash of a helicopter coming from the Gullfaks B field in the Norwegian North Sea.

OSHA Occupational Safety and Health Committee Schedules Fourth Emergency Response Meeting

The meeting is for the Emergency Response and Preparedness Subcommittee.

OSHA Finds Multiple Hazards After Battery Manufacturer's Worker Loses Part of a Finger

Exide Technologies also received an alert letter for a lack of heat-stress program.

FRA Makes $25 Million Available for Infrastructure Upgrades

The Obama administration has also requested $2.3 billion in the FY2017 budget.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

American Coatings Association Pushing for TSCA Reform Bills

ACA has supported two bills: the Frank R. Lautenberg Chemical Safety for the 21st Century Act, S. 697, which passed the U.S. Senate on Dec. 17, 2015, and a House of Representatives bill, H.R. 2576, which passed June 23, 2015, on a 398-1 vote.

OSHA Cites Berlin Builders Inc. Again for Fall Violations

Nicholas DeJesse, director of the agency's Philadelphia Area Office, said "A developer and contractor that hire this company are truly rolling the dice on worker safety. Amid the hazards we have cited, two Berlin Builders' employees suffered falls in 2015. This employer must make immediate changes before something worse happens."

Convenience Store Where Employed Died in Robbery Cited for Lack of Safety Protections

One willful citation was issued to Jay Management Inc.

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

Featured

Artificial Intelligence

Webinars