Top Stories


Employers should consider the most likely types of injuries for the site when assembling first aid supplies. In hot working conditions, this would include supplies to treat heat-related illnesses. (J.J. Keller & Associates photo)

It's Not Just the Heat—How OSHA Enforces Occupational Exposures to Hot Environments

If an employee needs medical treatment for heat stress, you would mark that as an illness on the OSHA 300 Log.

Because of the synergistic effect of many chemicals with noise, wearing a respirator and hearing protection together is an ideal defense against hearing loss whenever chemicals and noise are simultaneously present. (Honeywell Industrial Safety photo)

Can Industrial Chemical Exposure Cause Hearing Loss?

It is important to remember that any chemical that is ototoxic is also likely to be poisonous to the kidneys, because the inner ear and the kidneys arise from the same germ layer during embryonic development.

Whenever heat stress has escalated to heat exhaustion, medical services should be called and on-site cooling of the person should immediately begin. Heat stroke can occur suddenly, without any symptoms of heat exhaustion.

Understanding the Ramifications of Heat in Work Environments

Non-weather dependent hot work environments are created by the heat generated and/or contained within the environment, due to the task being performed, or both.



Companies that are committed to doing things right will do so even in down business cycles, rather than abandoning these projects during downturns.

Reducing Electrical Hazards

When safety becomes one of the design criteria for a project, it's a much more economical approach for that customer or company.

While it can be stressful to be in the middle of an unsettled industry, safety professionals are encouraging their teams by reminding them that those still working represent the best of the industry. (Cestusline, Inc. photo)

Seven Ways to Go Back to Basics With Your Safety Program

Using effective control factors to streamline PPE selection and simplify conformity across sites has the full attention of today’s safety managers.

Today, a fleet of gas detectors can be managed more efficiently via an instrument management system, which may calibrate, charge, generate compliance reports, and more, automating the safety task and eliminating time-consuming, tedious paperwork for the busy safety engineer. (Honeywell Industrial Safety photo)

Selecting the Right Gas Detection Solution

Temperature, humidity, and pressure levels at the location all have a direct bearing on the type of equipment that should be selected.

Military drivers, farmers, and firefighters would be generally exempt from the proposed requirements, as well as drivers applying for a more restricted license.

FMCSA's New Training Standards for Entry-Level Drivers

The ripple effects of the 2016 proposed rule have yet to be determined.

E. Coli Concern Causes Major Flour Recall

"As a leading provider of flour for 150 years, we felt it was important to not only recall the product and replace it for consumers if there was any doubt, but also to take this opportunity to remind our consumers how to safely handle flour," said Liz Nordlie, president of General Mills Baking division.

CSB Urges EPA to Require Inherently Safer Technologies

Commenting on a proposed rule on accidental release prevention requirements, the board has asked EPA to adopt more robust requirements regarding the use of inherently safer systems analysis and the hierarchy of controls.

UK Telecom Firm Fined $881,000 for Fall Hazards

British Telecommunications PLC has been fined £600,000, equivalent to $881,000, after two of its workers were seriously injured in falls in April 2010, the UK's Health and Safety Executive reported May 27.

The 2016 World No Tobacco Day on May 31 is WHO

World No Tobacco Day Aims to Boost Plain Packaging

WHO calls plain packaging "an important demand reduction measure that reduces the attractiveness of tobacco products, restricts use of tobacco packaging as a form of tobacco advertising and promotion, limits misleading packaging and labeling, and increases the effectiveness of health warnings."

NFPA Combustible Dust Standard Now in Place

An NFPA staff member provided an update on the new NFPA 652 standard during the AIHce 2016 meeting and said the association is moving toward a single combustible dust standard.

Top Posters Address Diacetyl Exposures, Noise Monitoring, Tobacco Workers' Illness

The displayed posters filled a large section of the expo floor in the Baltimore Convention Center. Many attendees walked up and down the rows seeking papers on topics of interest.

AIHce Heading West in 2017

The key conference for industrial hygienists will take place June 2-8, 2017. Meanwhile, the AIHA Fall Conference is only five months away.

12 Million Vehicles Recalled Over Takata Air Bags

12 Million Vehicles Recalled Over Takata Air Bags

Eight manufacturers were affected.

Product Showcase

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

Featured

Artificial Intelligence

Webinars