Top Stories


Steelmaker Fined $1.2 Million for Toxic Release

"It was extremely fortunate no one was seriously affected by this incident. Had the flammable vapor cloud ignited, this could have resulted in multiple fatalities," HSE inspector Stephen Hargreaves said. "This incident highlights the need for all duty holders to implement and address all concerns and potential risks which have been identified. Tata's failure to do so in this case put a number of workers at risk of serious harm."

KDOL Amusement Ride Rules Hearing Scheduled

The proposed permanent regulations mirror the temporary regulations that went into effect July 1, 2017.

Gains Made in Fingerprint Analysis: NIST

An algorithm developed by NIST and Michigan State University researchers may help to reduce the chance of human error in the first step of fingerprint analysis.



Order Signed for Mexico's Largest Wind Park

"Mexico is undergoing a historical moment in its energy policy and we are extremely pleased to play an active role in this process. By building Mexico's largest wind park with Vestas' turbines, we are taking a bold step in the country's transition towards renewables," said Adrián Katzew, CEO of Zuma Energía.

HHS Awards Money to Aid 1,333 Health Centers

Health centers are receiving the funds to continue improving their services based on their high performance in one or more of these categories: Improving Quality of Care, Increasing Access to Care, Enhancing Delivery of High Value Health Care, Addressing Health Disparities, and Achieving Patient-Centered Medical Home Recognition.

OSHA Announces Second Meeting on Strengthening VPP

It will take place 1-4 p.m. Aug. 28 in New Orleans. The agency wants stakeholders to provide new ideas on three subjects: overall VPP process and flow, corporate/long-term participant involvement, and Special Government Employee activities.

NY 2017 Speed Week Tickets Topped 21,000

As part of the enforcement campaign, troopers targeted speeding and aggressive drivers statewide, watching for impaired and distracted drivers, vehicle occupants who were not properly buckled up, and drivers who violated the "Move Over Law" that requires them to exercise extreme caution when passing emergency vehicles stopped in or on the side of the road.

Incorporating JSAs Into Your Safety Process

All information captured by you and your team can be further analyzed and used in order to predict, mitigate, and avoid risk.

Alaska Aviation Safety Back in the Spotlight This Week

Pilot training, FAA oversight of Hageland Aviation, and guidance for pilots on deteriorating weather conditions to mitigate controlled-flight-into-terrain risk are topics to be discussed at the Aug. 17 hearing in Anchorage.

VF Corp. Buying Dickies

Steve Rendle, president and CEO of VF, said the acquisition "combines two great companies and a group of iconic brands to create a global leader in workwear with approximately $1.7 billion in annual revenue. We look forward to welcoming Williamson-Dickie and its 7,000 dedicated employees to the VF family."

Hawaii Approves Second Licensed Dispensary to Start Sales

"The opening of a licensed dispensary on Oahu is a major milestone for the more than 5,000 qualified patients and caregivers in Honolulu," said Health Director Dr. Virginia Pressler. "Our staff continues to work with all the licensees as they build their facilities and business operations in compliance with county and state laws to ensure product and patient safety."

MSHA Implements Medical Action Plan for Some Employees

MSHA inspectors and technical personnel are required to have periodic medical examinations and meet U.S. Office of Personnel Management-approved medical standards. MSHA determined approximately 15 to 20 percent of MSHA inspectors and technical personnel do not currently meet the agency's medical standard.

Two Hearings This Week on Washington's Sick Leave Rules

"We know paid sick leave is a big change for employers and workers," said Annette Taylor, deputy assistant director of L&I's Fraud Prevention & Labor Standards. "We're doing everything we can to make sure people know what the proposed rules are and have an opportunity to provide input before this significant change happens in January."

NIOSH Completes NORA's Second Decade, Readies for Third

"With this report, we have a clear picture of the value of bringing together groups that all have an interest in occupational safety and health and the impact we can have when we work together on shared goals," Director Dr. John Howard said.

CDC Estimates 3.4 Million Americans Living with Epilepsy

"Epilepsy is common, complex to live with, and costly. It can lead to early death if not appropriately treated," said Rosemarie Kobau, MPH, head of CDC's Epilepsy Program. "Everyone should know how to recognize a seizure and how to give appropriate first aid."

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence

Webinars