Top Stories


The hazmat rules are constantly under construction, with a new requirement or restriction always on the horizon. (Lion Technology Inc. photo)

Is America's Hazmat in Good Hands?

Yes, for now. But the world will need a new crop of dedicated dangerous goods professionals to ensure hazmat reaches its destination, safely and on time.

Ejection Seat Manufacturer Fined $1.4 Million in Red Arrows Pilot's Death

An investigation by the Health and Safety Executive concluded a mechanical fault led to the failure of the parachute deployment mechanism designed to bring the 35-year-old pilot to ground safely, and this resulted in the main parachute failing to deploy.

Preparing for Automated Driving Systems

Weighty questions about the technologies include how the current standard for stability control testing can be amended for ADS vehicles that have no steering wheel.



Safe Sounding Workplaces

Using sound mapping software rather than measurements means you can predict future noise levels and take pre-emptive steps to control the noise.

Fatal Fall Brings $40,096 Fine

OSHA investigated the company after an employee installing patio screen enclosures died from a fall. L.I. Aluminum was issued four serious citations for failing to provide fall protection to employees working at heights of 10 feet or more; exposing employees to falls; and failing to train employees on fall hazards and the proper use of ladders.

Lockout leadership can be the missing link that drives continuous improvement leading to meaningful change in the safety culture of the adapting workplace. (The Master Lock Company photo)

Lockout Leadership as a Path to Advancing the Practice

It is much more effective to share with workers the ways and means the company has decided to do things, rather than let impersonal government regulations drive critical behaviors.

Even if employees do remember all of the layers of protective equipment they need, the inconvenience of having to put on and take off multiple items may deter them from wearing all of the necessary PPE. (Workrite Uniform Company photo)

PPE Tips for Encouraging Wearer Compliance

The best way to prevent costly injuries is to promote safe work practices, provide the necessary PPE, and do everything possible to encourage wearer compliance.

New fiberglass materials are available and can reduce the weight of your ladder by 20 percent. Most ladder companies now offer a lighter-weight version of some ladders. (Little Giant Ladder Systems photo)

Ladders—A Need for Change

The safest way to design a product is to design out the dangers. If it’s impossible to design out all of the dangers, then you guard against those dangers.

Top-Line Concerns

Head and face hazards are a constant for workers in construction, waste management, and in some manufacturing settings.

Driverless Vehicle Testing, Use OK in California

"This is a major step forward for autonomous technology in California," DMV Director Jean Shiomoto said. "Safety is our top concern, and we are ready to begin working with manufacturers that are prepared to test fully driverless vehicles in California."

HVLS fans are gaining recognition as an efficient way of improving air movement, reducing heat stress, lowering energy costs, and creating a better overall environment. (Rite-Hite photo)

Reducing Heat Stress with HVLS Fans and Dock Seals

Dock equipment keeps conditioned air inside. HVLS fans circulate air to boost employee comfort, safety, and efficiency.

Comfort differs greatly from person to person, making it a poor benchmark to judge garment suitability. It should not be the sole determining factor. (Westex by Milliken photo)

Exploring Measures to Protect Your Employees from Heat Stress

There are a number of ways to guard against heat stress, and those can be divided into preventative measures, protective measures, and proper attire.

Anybody can choose to go above and beyond what OSHA requires. In this case, going above and beyond could reduce the chance that something is done incorrectly.

Do You Really Need a 5,000-Pound Anchor Point to Satisfy OSHA?

You may be eliminating perfectly good anchor points where it’s already difficult to achieve proper fall protection.

Energy Inspector General Faults Beryllium Controls at Los Alamos National Laboratory

The IG's Feb. 20 report concluded LANL did not fully implement an effective Prevention Program as required, did not complete hazard assessments with sampling plans for each record in its 2016 beryllium inventory, and released potentially contaminated areas for other use without a formal evaluation to ensure any residual contamination was within acceptable limits.

Red Light Enforcement Funds Going to 35 Pennsylvania Cities

The state's Automated Red Light Enforcement program works to improve safety at signalized intersections by providing automated enforcement at locations where data shows red light running has been a problem. Total funding since 2010 has reached $62.87 million for 366 safety projects.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

Featured

Artificial Intelligence

Webinars