Top Stories


CSB to Release Final Investigation Report on PCA Explosion

The explosion occurred at the company’s Pulp and Paper Mill during hot work activities during the facility’s annual shutdown, killing three contract workers and injuring seven others.

OSHA Cites Contractor for Exposing Workers to Trenching, Other Safety Hazards

“Trenching and excavation are among the most hazardous construction operations, and employers have an obligation to follow safety requirements designed to protect their workers,” OSHA Bismarck Area Office Director Eric Brooks.

Schneider Electric Recalls Safety Switches Due to Electrical Shock Hazard

Schneider Electric Recalls Safety Switches Due to Electrical Shock Hazard

Schneider Electric has recalled about 1,079,000 units of the Square D brand General Duty 30 & 60A, 120/240-volt, 2-phase and 3-phase NEMA 3R Safety Switches because the power can stay on when the safety switch handle is in the “OFF” position, posing an electrical shock or electrocution hazard to consumers.



NTSB to Host Roundtable on In-Flight Loss of Control

The one-day roundtable, “Prevent Loss of Control in Flight in General Aviation Through Training and Technology," will take place in Washington, D.C., on April 24. Eighteen industry and government experts will participate, and the discussion will be moderated by NTSB Chairman Robert L. Sumwalt.

Southwest Airlines Engine Explodes in Flight, Killing a Passenger

It was the first passenger fatality in a U.S. airline accident since 2009, according to National Transportation Safety Board (NTSB) chairman Robert Sumwalt.

Arizona Agencies Preparing for the Heat

Dr. Cara M. Christ, director of the Arizona Department of Health Services, reported on her blog last week that officials have begun planning for a hot summer, after a June 2017 heat wave last year brought record high temperatures.

More Than 6,200 Postal Workers Attacked By Dogs in 2017

State Farm reported it paid more than $132 million in 2017 as a result of 3,618 dog-related injury claims. The average cost paid per claim was $36,573.

NIST Releases Updated Cybersecurity Framework

"Cybersecurity is critical for national and economic security," said U.S. Secretary of Commerce Wilbur Ross. "The voluntary NIST Cybersecurity Framework should be every company's first line of defense. Adopting version 1.1 is a must do for all CEOs."

ASSE Foundation Sets New Record for Scholarships and Awards

By awarding more than $375,000 in scholarships and grants to 117 individuals seeking advancement in the occupational safety and health profession, the foundation topped its previous record of $303,665 awarded in 2017.

NTSB Safety Alert Concerns Protecting Bridges from Fire Damage

It is based on a collapse that occurred about 6 p.m. on March 30, 2017, in Atlanta. About an hour after long-stored construction materials under I-85 were set on fire, a 92-foot-long elevated span of I-85 collapsed.

CDC Hosting 67th EIS Conference This Week

The April 16-19 conference includes four special sessions on critical public health topics: the Rohingya refugee crisis in Bangladesh, the need for innovative use of big data in public health, the 1918 influenza centenary, and the U.S. opioid overdose epidemic.

Texas Work Zone Deaths Rose 9 Percent in 2017

There were 199 work zone fatalities in Texas during 2017, but just 4 percent of the victims were road crew workers. The other 96 percent were motorists, pedestrians, and bicyclists, according to TxDOT. There were 813 work zone serious injuries recorded in the state during 2017.

ATA Hires New Safety Policy Director

Dan Horvath joined ATA after more than five years as the director of compliance and safety at TransForce Inc.

Lead in Drinking Water: Should You be Worried?

Lead in Drinking Water: Should You be Worried?

In 2015, the news about the high lead levels in Flint, Michigan’s drinking water caused the nation to focus its attention on lead.

During the April 2018 tour, the Air Force Reserve Command

'Hurricane Hunter' Tour Heading to Mexico, Caribbean

"Last year's hurricanes Irma and Maria were some of the most powerful hurricanes ever to strike Mexico or the Caribbean," National Hurricane Center Director Ken Graham said April 10. "Even as recovery from these devastating hurricanes continues, we have to prepare for another season that is just weeks away."

Product Showcase

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

  • Preventative Heat Safety

    Dehydration and heat exposure impair physical and cognitive performance. Proper hydration boosts heat stress resilience, but hydration needs are highly individualized and hard to predict across a workforce. Connected Hydration® empowers industrial athletes to stay safe through behavioral interventions, informed by sports science, and equips safety teams with critical insights to anticipate high-risk situations and adapt to evolving environmental factors. Curious about applying the latest in sports science based hydration strategies for industrial athletes? Stop by booth #1112 at AIHA or schedule a free demo today at https://epcr.cc/demo. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

Featured

Artificial Intelligence

Webinars