Top Stories


State DOTs Ready for Winter Weather

Supplies, contractors, training, and practice all contribute to their preparation for plowing operations.

Some Sandia Workers to Be Added to SEC

The class to be added consists of all employees of the Department of Energy, its predecessor agencies, and its contractors or subcontractors who worked in any area at the Sandia National Laboratories during the period from Jan. 1, 1995, through Dec. 31, 1996, for a number of work days aggregating at least 250 work days.

MIOSHA in Safety Partnership at GVSU Construction Project

The partners will work to ensure safety through several key elements, including 100 percent fall protection over 6 feet; 100 percent personal protective equipment, including hard hats, eye protection, and high-visibility outer clothing; and ensuring all crane operators are certified.



Minnesota Workplace Injury Rate Reaches All-Time Low

The survey estimated that in 2017, the state had 72,500 workers with OSHA-recordable nonfatal workplace injuries and illnesses, compared to 73,600 cases for 2016.

Salmonella Outbreak Linked to Raw Turkey Products

As of Nov. 5, 2018, 164 people infected with the outbreak strain of Salmonella Reading have been reported from 35 states, and 63 people have been hospitalized. One death has been reported from California.

UK Company Fined $1.5 Million After Gas Main Fire

Two workers were injured, with one suffering severe burns, when a gas main ignited while they were trying to repair a leak.

OSHA Issues Final Rule on Crane Operator Certification Requirements

With the exception of the evaluation and documentation requirements, the final rule will become effective on Dec. 9, 2018. The requirements for evaluation and documentation will become effective on Feb. 7, 2019.

Based on its investigations of combustible dust incidents, the U.S. Chemical Safety Board has concluded that they are entirely preventable. (Photo by Andrew Hancock, Huntington Herald-Press, included in CSB

Combustible Dust Comments Due to CSB Soon

The safety board wants comments by Nov. 26 on the management and control of combustible dust from companies, regulators, inspectors, safety training providers, researchers, unions, and workers exposed to dust-related hazards.

Cigarette Smoking Among U.S. Adults Reaches Lowest Level Ever Recorded

In 2017, an estimated 14 percent of U.S. adults (34 million) were current (past 30-day) cigarette smokers, a decrease of 15.5 percent in 2016 and a 67 percent decline since 1965. Notably, the number of young adults aged 18 to 24 years decreased from 13 percent in 2016 to 10 percent in 2017.

BLS Reports Private-Industry Recordable Case Rate Declined Slightly in 2017

The 2017 rate of total recordable cases was 2.8 per 100 FTE workers, down from 2.9 the year before.

Kubota Recalls Mowers and Compact Tractors Due to Burn Hazard

According to the recall notice, hot coolant can spray out onto users from the overheated and pressurized coolant reservoir tank and pose a burn hazard. Kubota has received three reports of burn injuries from the coolant ejecting from the reservoir tank.

NYC Postpones Construction Safety Training Mandate

The six-month delay doesn't affect the ultimate aim of the law requiring workers to have 40 hours of training by September 2020. Supervisors will be required to have 62 hours.

ISEA Seeks Public Comments on Proposed Industry Standard for Impact Resistant Gloves

ISEA Seeks Public Comments on Proposed Standard for Impact-Resistant Gloves

The standard, currently designated ISEA 138, would establish minimum requirements for performance, classification, and labeling in hand protection products designed to protect the knuckles and fingers from impact forces while performing tasks at work.

WorkSafeBC Video Stresses Use of Personal Flotation Devices in the Fishing Industry

Commercial fishing is one of British Columbia’s most dangerous occupations, and drowning is the leading cause of death for the province’s fishermen.

Duck Boat's Captain Charged

The indictment alleges Kenneth Scott McKee failed to properly assess the nature of the severe weather while the vessel was on the water and operated it in violation of the conditions and limitations specified in the vessel's certificate of inspection. When severe weather arrived at the vessel's location, the indictment says, McKee failed to instruct passengers to don personal flotation devices and also allegedly failed to immediately increase speed and head to the nearest shore.

Product Showcase

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Kestrel 5400 Heat Stress Tracker WBGT Monitoring for Workplace Safety

    Ensure safety with the Kestrel® 5400 Heat Stress Tracker, the go-to choice for safety professionals and endorsed by the Heat Safety & Performance Coalition. This robust, waterless WBGT meter is ideal for both indoor and outdoor environments, offering advanced monitoring and data logging essential for OSHA compliance. It features pre-programmed ACGIH guidelines and alert settings to quickly signal critical conditions. Integrated with the cloud-based Ambient Weather Network, the 5400 allows managers to view, track, and log job site conditions remotely, ensuring constant awareness of potential hazards. Its capability for real-time mobile alerts and remote data access promotes proactive safety management and workplace protection, solidifying its role as a crucial tool in industrial hygiene. Read More

  • AirChek Connect Sampling Pump

    Stay connected to your sampling with the SKC AirChek® Connect Sampling Pump! With its Bluetooth connection to PC and mobile devices, you can monitor AirChek Connect pump operation without disrupting workflow. SKC designed AirChek Connect specifically for all OEHS professionals to ensure accurate, reliable flows from 5 to 5000 ml/min and extreme ease of use. AirChek Connect offers easy touch screen operation and flexibility. It is quality built to serve you and the workers you protect. Ask about special pricing and a demo at AIHA Connect Booth 1003. Read More

Featured

Artificial Intelligence

Webinars