Top Stories


Faulty Materials Caused Two Launch Failures: NASA

"Due in large part to the hard work and dedication of many highly motivated people in the NASA Launch Services program, we are able to close out the cause of two extremely disappointing launch vehicle failures and protect the government aerospace supply chain," said Amanda Mitskevich, LSP program manager at NASA's Kennedy Space Center.

DOT Announces Appointment of Maritime Advisory Committee Members

"The insights, experience, and perspectives of these committee members are essential to federal transportation decision-making," said federal Maritime Administrator Mark H. Buzby. "The MTSNAC is a strategic resource needed to strengthen and re-energize the maritime industry."

One of the easiest ways to monitor safety metrics is by using a safety management software. As you improve your safety performance analysis, you’ll need a system that can handle the influx of data, give you access to real-time metrics, and help you glean valuable insights hidden within the flood of information.

How to Conduct a Safety Inspection Remotely

Remote inspections can be an alternate and effective way to conduct a safety inspection.



By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

Chemical Management: Five Ways to Meet the Challenges of IH in a Changing Industry

The most robust software solutions feature ingredient indexing to help you track chemical ingredients across products while flagging those that are subject to more stringent regulatory standards.

Test manikin before exposure, dressed in non-inherent shirt and inherent pants. (DuPont Protection Solutions photo)

New Considerations for Selecting Flame-Resistant Workwear

In a real-world fire emergency, chances are that workers will need to flee to safety, so it is critical that FR workwear continue to provide coverage and allow mobility to protect workers after a flash fire or arc flash.

The last thing first responders need is a false pass on their respiratory protection fit. (OHD, LLLP photo)

Why Respiratory Protection and Fit Testing Matter

I cannot stress enough how important it is for all first responders to always wear respiratory protection on the fireground—even after the fire is out.

Excessively hot or cold water temperatures in safety showers and eyewashes can exacerbate the very injuries the safety equipment is designed to reduce. (Haws Corporation photo)

Best Practices When Procuring, Placing and Maintaining Your Emergency Eye/Face Wash and Showers

It is critical to ensure that the equipment is functioning properly and highly visible in case of an emergency.

A written respiratory protection program must be implemented that meets all of the requirements of 29 CFR 1910.134. (3M Personal Safety Division photo)

Why Pick a PAPR?

PAPRs are useful and often necessary in many types of hazardous jobs and conditions.

The primary causes of heat stress are poor hydration, lack of shade, and lack of rest breaks, not clothing. (Tyndale Company photo)

The Truth About Heat Stress and FRC

It would be a terrible shame to put American workers at risk of catastrophic or fatal burn injury because of an outdated myth about PPE and heat stress.

This CSB photo shows the aftermath of the Imperial Sugar plant explosions in 2008 and is found in the U.S. Chemical Safety and Hazard Investigation Board

Towards Compliance: NFPA 652 Standard on the Fundamentals of Combustible Dust

If explosion preventive measures alone cannot reduce the risk of a dust cloud explosion to an acceptable level, then explosion protection measures must be considered.

Stress in the World of Industrial Hygiene: Is It Understood?

How does stress affect an employee's health to the point that we need to take it into consideration when evaluating their working environment? Should stress be included in the evaluation to management as a matter of concern?

Fire Safety: Plan, Prevent, Train, Recover

Fires have the highest casualty rate of workplace accidents, but there are ways to mitigate risk.

The LEED-certified, 1.6 million-square-foot Minneapolis Convention Center features 475,000 square feet of exhibit space and 87 meeting rooms. (Minneapolis Convention Center photo)

Underestimated No More

The conference's opening session will feature keynote speaker Carey Lohrenz, the first female F-14 Tomcat fighter pilot in the U.S. Navy, speaking on "Lessons in Leadership."

Chemical Protective Clothing Selection—Finding the Best Match for Your Hazard

You should strive to gather permeation data for the CPC you plan to use against your actual workplace chemicals.

Wage and Hour Concludes Service Providers for Virtual Marketplace Company Are Independent Contractors

To make the determination, WHD applied what DOL described as "its longstanding and unchanged six-factor balancing test, derived from Supreme Court precedent."

Product Showcase

  • SwabTek® Cannabis Test Kit

    The SwabTek® Cannabis Test Kit is a single-use spot test designed for use in screening for cannabis compounds in any sample type or on any surface. The test is capable of identifying the presumed presence of cannabinoids in very small quantities, with a level of detection as little as 6 μg in mass. Learn more about the SwabTek® Cannabis Test Kit and the rest of SwabTek surface drug testing solutions through the webinar titled "Everything You Want To Know About Surface Testing" Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

Featured

Artificial Intelligence

Webinars