Top Stories


NYS Health Department Dedicates Statue to Physician Who Championed Handwashing

"This statue will serve as a reminder of a practice that is near and dear to public health: the simple, yet vital, act of handwashing to help prevent the spread of illness," said New York State Health Commissioner Dr. Howard Zucker. "We are honored to be among the recipients chosen for this display as we continue our efforts to encourage best practices for infection control."

CSB Asks EPA to Review 1993 HF Study

In a letter to EPA Administrator Andrew Wheeler, the safety board cited two of its recent investigations. CSB conducted public hearings in both at which members of the surrounding communities expressed concern about the adequacy of the risk management strategies for the use of HF and the effectiveness of community notification procedures in the event of a catastrophic release.

Scaffolding, Roofs, Ladders, and More: 6th Annual Stand-Down Almost Here

CPWR has posted many resources on its Stand-Down website, including a five-day plan for getting workers to focus on falls during the week. Among the suggestions the organization makes are to use CPWR-NIOSH infographics, CPRW fatality maps, and NIOSH and state Fatality Assessment and Control Evaluation reports to focus workers' attention on identifying fall hazards.



U.S., Peru Sign Agreement to Enhance SAR Capabilities

This is the first binding SAR agreement between the United States and a South American country and will serve as the basis for future bilateral cooperation and coordination.

Community Risk Reduction is defined in NFPA 1035 as "programs, actions, and services used by a community, which prevent or mitigate the loss of life, property, and resources associated with life safety, fire, and other disasters within a community."

Maryland's Governor Signs Two Firefighters Benefits Bills

House Bill 595 adds bladder and kidney, or renal cell cancers to the types of cancers considered as occupational diseases for firefighters under the workers' compensation law. The other bill will expand workers' compensation coverage by closing loopholes regarding cumulative time served.

Faulty Materials Caused Two Launch Failures: NASA

"Due in large part to the hard work and dedication of many highly motivated people in the NASA Launch Services program, we are able to close out the cause of two extremely disappointing launch vehicle failures and protect the government aerospace supply chain," said Amanda Mitskevich, LSP program manager at NASA's Kennedy Space Center.

DOT Announces Appointment of Maritime Advisory Committee Members

"The insights, experience, and perspectives of these committee members are essential to federal transportation decision-making," said federal Maritime Administrator Mark H. Buzby. "The MTSNAC is a strategic resource needed to strengthen and re-energize the maritime industry."

One of the easiest ways to monitor safety metrics is by using a safety management software. As you improve your safety performance analysis, you’ll need a system that can handle the influx of data, give you access to real-time metrics, and help you glean valuable insights hidden within the flood of information.

How to Conduct a Safety Inspection Remotely

Remote inspections can be an alternate and effective way to conduct a safety inspection.

By June 1, 2016, OSHA expects all employers to be fully compliant with GHS adoption.

Chemical Management: Five Ways to Meet the Challenges of IH in a Changing Industry

The most robust software solutions feature ingredient indexing to help you track chemical ingredients across products while flagging those that are subject to more stringent regulatory standards.

Test manikin before exposure, dressed in non-inherent shirt and inherent pants. (DuPont Protection Solutions photo)

New Considerations for Selecting Flame-Resistant Workwear

In a real-world fire emergency, chances are that workers will need to flee to safety, so it is critical that FR workwear continue to provide coverage and allow mobility to protect workers after a flash fire or arc flash.

The last thing first responders need is a false pass on their respiratory protection fit. (OHD, LLLP photo)

Why Respiratory Protection and Fit Testing Matter

I cannot stress enough how important it is for all first responders to always wear respiratory protection on the fireground—even after the fire is out.

Excessively hot or cold water temperatures in safety showers and eyewashes can exacerbate the very injuries the safety equipment is designed to reduce. (Haws Corporation photo)

Best Practices When Procuring, Placing and Maintaining Your Emergency Eye/Face Wash and Showers

It is critical to ensure that the equipment is functioning properly and highly visible in case of an emergency.

A written respiratory protection program must be implemented that meets all of the requirements of 29 CFR 1910.134. (3M Personal Safety Division photo)

Why Pick a PAPR?

PAPRs are useful and often necessary in many types of hazardous jobs and conditions.

The primary causes of heat stress are poor hydration, lack of shade, and lack of rest breaks, not clothing. (Tyndale Company photo)

The Truth About Heat Stress and FRC

It would be a terrible shame to put American workers at risk of catastrophic or fatal burn injury because of an outdated myth about PPE and heat stress.

This CSB photo shows the aftermath of the Imperial Sugar plant explosions in 2008 and is found in the U.S. Chemical Safety and Hazard Investigation Board

Towards Compliance: NFPA 652 Standard on the Fundamentals of Combustible Dust

If explosion preventive measures alone cannot reduce the risk of a dust cloud explosion to an acceptable level, then explosion protection measures must be considered.

Product Showcase

  • EMSL Analytical, Inc. - Air Sampling Supplies & Testing Labs

    EMSL Analytical, Inc. operates laboratories throughout the United States and Canada. EMSL is a nationally recognized and locally focused provider specializing in fast laboratory results for Asbestos, Mold, Silica, Lead & Metals, Bacteria, Legionella, USP , Combustion By-Products, VOC’s, Radon, PCB’s, Formaldehyde, METH/Fentanyl, Identification of Dust & Unknowns. Sampling Pumps, Cassettes, Media & Supplies available. Reach us at 1-800.220.3675 Read More

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence