Top Stories


ASSP and NIOSH Renew Partnership for Five Years

"We have a common mission to prevent workplace injuries, illnesses, and fatalities, so we want to benefit from each other's experience and combine resources where possible to improve occupational safety and health performance," ASSP President Rixio Medina said.

Wearable Sensors: 'Tremendous Opportunity,' Some Challenges

Potential benefits of the technologies include preventing and mitigating injuries, decreasing the extent and duration of disability, enhancing employee wellness, and improving productivity. Injury prevention studies of wearable technologies' effect are rare, however, and employee acceptance of them could be an implementation challenge, two speakers said during an AIHce EXP 2019 session.

Most Highway Contractors Have Experienced Vehicle Crashes at Work Sites: AGC Study

According to a new highway work zone study conducted by the Associated General Contractors of America, 67 percent of highway contractors report that motor vehicles had crashed into their construction work zones during the past year.



Biosafety Issues in Focus in AIHce Conference

For the first time, U.S. physicians' rates of suffering needlesticks and sharps injuries exceeded nurses' rates during 2017, an International Safety Center presenter said during a "Biosafety Issues in IH" session at the AIHce EXP 2019 conference.

NIOSH Robotics Joining More Partnerships

The NIOSH Center for Occupational Robotics Research has partnerships in placed with the Robotic Industries Association, Ohio State University, and North Carolina State University ISE. It will partner with the National Science Foundation a year from now, said Chuck Geraci, Ph.D., CIH, FAIHA, who is NIOSH's associate director for emerging technologies.

Are Smart Phones Smart to Use on a Work Site?

Communication is critical on construction sites. Whether for coordinating movement of materials or issuing warnings, it is important that workers be able to clearly communicate with each other.

Virginia Recognizes 20 Mines, Nine Miners for Excellence in Worker Safety

Five surface mines will also receive a special award in honor of the entire crew working five years without a lost time accident.

NTSB: Inadequate Planning, Insufficient Training Led to Fatal 2017 Amtrak Derailment

IMAGE: SEATTLE TIMES

NTSB: Inadequate Planning, Insufficient Training Led to Fatal 2017 Amtrak Derailment

Failure to provide an effective mitigation for a hazardous curve and inadequate training of a locomotive engineer led to the overspeed derailment of an Amtrak passenger train that hurtled off a railroad bridge and onto a busy DuPont, Wash., highway, the National Transportation Safety Board announced Tuesday.

WorkSafeBC Releases New Resources on Noise-Induced Hearing Loss in the Service Industry

WorkSafeBC aims to raise awareness about the risk of hearing loss in the service industry with the release of a new safety bulletin and other resources for workers and employers.

NSC Estimates 380 Roadway Deaths During Memorial Day Weekend

NSC Estimates 380 Roadway Deaths During Memorial Day Weekend

For the first time in four years, the National Safety Council estimates fewer than 400 fatalities on the road during Memorial Day weekend.

British Safety Council Calls for UK to Recognize Air Pollution as Occupational Health Hazard

The British Safety Council’s recently released report, Impact of air pollution on the health of outdoor workers, makes an argument for recognizing air pollution as an occupational health hazard in Britain.

3M PSD's 2019 Scholarships Awarded at AIHce

In the 33rd year for these scholarships, the 3M Personal Safety Division is giving $5,000 to three students who are pursuing graduate degrees in occupational health and safety/industrial hygiene.

The LEED-certified, 1.6 million-square-foot Minneapolis Convention Center features 475,000 square feet of exhibit space and 87 meeting rooms. (Minneapolis Convention Center photo)

Yucca Mountain Workers' Health Concerns Highlighted

Workers at the Yucca Mountain Project in Nevada could be exposed to potentially serious respiratory and radiation hazards if the long-planned High Level Nuclear Waste repository is revived and advanced by Congress, two presenters explained in an educational session at this week's AIHce EXP 2019 conference and expo here.

NIOSH Details New Tools for Chemical Risk Assessment, Management

AIHce EXP 2019 attendees filled a meeting room May 20 to learn about current NIOSH work projects on chemical risk assessments and management of those risks

Product Showcase

  • Matrix's OmniPro Vision AI Collision Avoidance System

    OmniPro Vision AI is a state-of-the-art collision avoidance system that features NIOSH award-winning Visual Artificial Intelligence (AI) technology. This highly accurate, powerful system identifies and alerts on pedestrians, vehicles and specified objects, ensuring safer facilities, mining operations and industrial sites. With its web-based cloud application, OmniPro Vision AI also logs and analyzes a wide range of data related to zone breach notifications. Operating without needing personal wearable devices or tags, OmniPro has visual and audible zone breach alerts for both operators and pedestrians. Read More

  • NoiseCHEK Personal Noise Dosimeter

    SKC NoiseCHEK is the easiest-to-use dosimeter available! Designed specifically for OEHS professionals, SKC NoiseCHEK offers the easiest operation and accurate noise measurements. Everything you need is right in your palm. Pair Bluetooth models to your mobile devices and monitor workers remotely with the SmartWave dB app without interrupting workflow. Careful design features like a locking windscreen, sturdy clip, large front-lit display, bright status LEDs, and more make NoiseCHEK the top choice in noise dosimeters. Demo NoiseCHEK at AIHA Connect Booth 1003. Read More

  • Full Line of Defense Against Combustible Dust Nilfisk

    Nilfisk provides a comprehensive range of industrial vacuums meticulously crafted to adhere to NFPA 652 housekeeping standards, essential for gathering combustible dust in Class I, Group D, and Class II, Groups E, F & G environments or non-classified settings. Our pneumatic vacuums are meticulously engineered to fulfill safety criteria for deployment in hazardous surroundings. Leveraging advanced filtration technology, Nilfisk ensures the secure capture of combustible materials scattered throughout your facility, ranging from fuels, solvents, and metal dust to flour, sugar, and pharmaceutical powders. Read More

Featured

Artificial Intelligence

Webinars