Top Stories


Virginia Recognizes 20 Mines, Nine Miners for Excellence in Worker Safety

Five surface mines will also receive a special award in honor of the entire crew working five years without a lost time accident.

NTSB: Inadequate Planning, Insufficient Training Led to Fatal 2017 Amtrak Derailment

IMAGE: SEATTLE TIMES

NTSB: Inadequate Planning, Insufficient Training Led to Fatal 2017 Amtrak Derailment

Failure to provide an effective mitigation for a hazardous curve and inadequate training of a locomotive engineer led to the overspeed derailment of an Amtrak passenger train that hurtled off a railroad bridge and onto a busy DuPont, Wash., highway, the National Transportation Safety Board announced Tuesday.



WorkSafeBC Releases New Resources on Noise-Induced Hearing Loss in the Service Industry

WorkSafeBC aims to raise awareness about the risk of hearing loss in the service industry with the release of a new safety bulletin and other resources for workers and employers.

NSC Estimates 380 Roadway Deaths During Memorial Day Weekend

NSC Estimates 380 Roadway Deaths During Memorial Day Weekend

For the first time in four years, the National Safety Council estimates fewer than 400 fatalities on the road during Memorial Day weekend.

British Safety Council Calls for UK to Recognize Air Pollution as Occupational Health Hazard

The British Safety Council’s recently released report, Impact of air pollution on the health of outdoor workers, makes an argument for recognizing air pollution as an occupational health hazard in Britain.

3M PSD's 2019 Scholarships Awarded at AIHce

In the 33rd year for these scholarships, the 3M Personal Safety Division is giving $5,000 to three students who are pursuing graduate degrees in occupational health and safety/industrial hygiene.

The LEED-certified, 1.6 million-square-foot Minneapolis Convention Center features 475,000 square feet of exhibit space and 87 meeting rooms. (Minneapolis Convention Center photo)

Yucca Mountain Workers' Health Concerns Highlighted

Workers at the Yucca Mountain Project in Nevada could be exposed to potentially serious respiratory and radiation hazards if the long-planned High Level Nuclear Waste repository is revived and advanced by Congress, two presenters explained in an educational session at this week's AIHce EXP 2019 conference and expo here.

NIOSH Details New Tools for Chemical Risk Assessment, Management

AIHce EXP 2019 attendees filled a meeting room May 20 to learn about current NIOSH work projects on chemical risk assessments and management of those risks

FAA Changes Recreational Drone Rules

Until further notice, ATC facilities will no longer accept requests to operate recreational drones in controlled airspace on a case-by-case basis. Instead, FAA is granting temporary airspace authorizations to fly in certain "fixed sites" in controlled airspace throughout the country.

New Orleans Wins Public Safety and Emergency Management Award

The award recognizes technology and innovation at the New Orleans Real-Time Crime Center.

FY2019 NRC Fees Increased for Operating Reactors

The FY2019 annual fees are increasing for operating reactors, research and test reactors, and some materials users. Annual fees will decrease for spent fuel storage/reactor decommissioning, fuel facilities, select materials users, U.S. Department of Energy transportation activities, and the DOE Uranium Mill Tailings Radiation Control Act Program.

An Introduction to the Safety Industry

For those of you who don't know, I'm Sydny Shepard, the soon-to-be Editor of Occupational Health & Safety upon Jerry Laws' retirement at the end of June.

Safe, Comfortable & Compliant: How to Avoid Heat Stress

From repairing electrical lines with thousands of volts running through them to orchestrating precise tasks hundreds of feet above the deck on an oil rig, lineman and oil and gas workers face countless hazards daily.

OSHA Considering Update of LOTO Standard

The agency seeks comments by Aug. 18. OSHA is interested in comments on the use of control circuit-type devices to isolate energy and also the evolving technology for robotics.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

Featured

Artificial Intelligence

Webinars