Top Stories


Easily Avoiding OSHA Citations and Remaining in Compliance

According to the top 10 most cited standards from OSHA, fall protection and hazard communications account for over 12,500 citations in the last fiscal year. Several of these citations stem companies and organizations that do not have a program to properly train employees, Paul Andersen of OSHA Compliance Services, LLC said in a session titled "30 Common OSHA Citations You Can Easily Avoid" at Safety 2019 this week.

ISEA to Work on Heat Illness National Standard, Wearables Guidance

Two of the International Safety Equipment Association's new projects involve work to bring about a national heat illness prevention standard and to offer help to the industry in managing the data from a host of connected, wearable products.

The Importance of Evaluating Indoor Air Quality

According to Louise Vallee, CSP, CIH, CPE, of Crum and Forester, office ergonomics and indoor air quality are the most common complaints of office employees. Management tends to prioritize these issues last creating more complaints from workers.



Live From Safety 2019 Day 1

The first day of the Safety 2019 show in New Orleans went by in a flash! Catch up on all the action by visiting our Live From Safety 2019 social zone at OHSonline.com/live!

U.S. House to Consider 2020 Appropriations Bill for Labor, HHS This Week

H.R. 2740 would provide a total of $13.3 billion in discretionary appropriations for the Department of Labor, including $298 million for the DOL Wage and Hour Division and $661 million for OSHA, which would be an increase of $103 million above the 2019 enacted level.

Louisiana's Governor Signs Firefighter PTSD Bill

SB 107 was unanimously passed in the state Legislature in late May. "This is a tremendous victory for our members in Louisiana," IAFF General President Harold Schaitberger said. "Now they can seek the treatment they need when they need it."

Risk Management Panel: Standards Help Drive Systematic, Repeatable Results

A Safety 2019 session on the ASSP Risk Management Institute focused on implementing risk management systems and utilizing several key standards, including ISO 45001 and 31000 and also ANSI Z10 and 590.3, Prevention Through Design.

Public Hearings Set on L&I's Proposed OT Reforms

"The current system is out of date. It's at risk of failing tens of thousands of workers by broadly defining what a white collar worker is, which allows businesses to pay salaries that may be even less than minimum wage," said L&I Director Joel Sacks. "We want to make sure that people who legitimately deserve overtime get paid for the extra hours they work. Washington's minimum wage has been updated repeatedly for decades; this hasn't been. This proposed rule links future salary thresholds to the minimum wage."

Huntsman Corporation Facility Wins Another Michigan VPP Star Award

"As a team, we're delighted to have secured STAR status once again," said Pete Panourgias, EHS manager at the Auburn Hills site. "The fact that we've held this accolade without a break for 15 years is a testimony to the dedication of our management and the efforts of each and every member of our team."

IAEA Opens New Linear Accelerator Facility

The new facility at IAEA laboratories in Seibersdorf, Austria, will significantly increase the agency's capacity to provide dosimetry services and support cancer control worldwide.

Revolutionizing the speed by which FDA personnel can check minimally processed fresh produce for Salmonella is the goal of the 2014 FDA Food Safety Challenge.

WHO Marks World Food Safety Day

"Every country around the world, from small to big, from rich to poor, has suffered from foodborne illnesses, and Europe is no exception. The scale of the challenge posed by foodborne disease is striking, indicating the importance of preventing and mitigating risks to food safety," said Dr. Zsuzsanna Jakab, WHO's regional director for Europe.

DOT Secretary Proposes Legislation to Reauthorize Pipeline Safety Programs

The proposed legislation would authorize PHMSA to use non-financial incentives to pipeline operators that voluntarily exceed the minimum federal pipeline safety regulations to ensure operating safety and reliability.

DOE Proposes to Redefine High-Level Radioactive Waste

According to DOE, the revised interpretation, "if implemented through subsequent actions," could provide a range of benefits to both DOE and the public.

New Commissioner Chosen for NYC Emergency Management

"I'm ready to get to work as commissioner for NYC Emergency Management in the greatest city in the world," Deanne B. Criswell said. "Thanks to Mayor de Blasio for the opportunity to bring my 25 years of experience to plan for, respond to, and protect 8.6 million New Yorkers when the city faces a crisis."

NTSB Meeting June 18 to Determine Cause of 2017 School Bus Fire

NTSB board members will determine the probable cause of an incident that killed a 74-year-old school bus driver and a 16-year-old student passenger when the bus caught fire near Oakland, Iowa, on Dec. 12, 2017.

Product Showcase

  • HAZ LO HEADLAMPS

    With alkaline or rechargeable options, these safety rated, Class 1, Div. 1 Headlamps provide long runtime with both spot and flood options in the same light. Work safely and avoid trip hazards with flexible hands-free lighting from Streamlight. Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars