Articles


A North Carolina-Based Health Care Provider Terminates Employees for Not Getting the COVID-19 Vaccine

A North Carolina-Based Health Care Provider Terminates Employees for Not Getting the COVID-19 Vaccine

Employees who received exemptions from getting vaccinated must follow specific protocols while at work.

Ohio Roofing Contractor Continues to Defy Federal Safety Requirements for Fall Protection

Ohio Roofing Contractor Continues to Defy Federal Safety Requirements for Fall Protection

The contractor was cited six times in five years for ignoring the industry’s deadliest hazard.

Recognize These Scams Targeting Trucking Companies

Recognize These Scams Targeting Trucking Companies

Trucking companies face many hazards, from poor road conditions to inclement weather to mechanical failure. One less obvious but equally pressing threat facing this industry is fraud.

U.S. Department of Labor’s OSHA will Hold a Virtual Meeting to Discuss Improvements on its Whistleblower Protection Program

U.S. Department of Labor’s OSHA will Hold a Virtual Meeting to Discuss Improvements on its Whistleblower Protection Program

OSHA has questions and comments about what it can do to improve its whistleblower service.

See You Next Year: ASSP to Host Safety 2022 in Chicago

See You Next Year: ASSP to Host Safety 2022 in Chicago

Safety 2022 will be in Chicago, Illinois next year from June 27 - 29, 2022.

Live From ASSP Safety 2021: Wrap Up

Safety 2021 might be over, but there is still much to see when it comes to OH&S’ live coverage of the event.

White House, OSHA Look to Enhance Measures for Extreme Heat

White House, OSHA Look to Enhance Measures for Extreme Heat

As part of an interagency effort to protect workers, the Biden-Harris administration enables OSHA to begin rulemaking process for a federal standard.

Back on the Road: OH&S Goes to Austin for ASSP Safety 2021

Episode 97

Back on the Road: OH&S Goes to Austin for ASSP Safety 2021

Curious what it was like at ASSP's Safety 2021 show in Austin, Texas last week? Editor Sydny Shepard gives an inside look at the conference as well as the planning that went into the event in the face of COVID-19.



Combustible Dust and PPE — 2 NFPA Standards to Know to Improve Safety Culture

Episode 96

Combustible Dust and PPE — 2 NFPA Standards to Know to Improve Safety Culture

OH&S editor Sydny Shepard sits down with Westex: A Milliken Brand’s Scott Francis to talk all about combustible dust. Listen in to find out why combustible dust is so hazardous and what NFPA standards apply.

Local Health Departments Plan for a Potential COVID-19 Booster Shot Amid Confusion

Local Health Departments Plan for a Potential COVID-19 Booster Shot Amid Confusion

More than 1.9 million people have already received an additional dose since mid-August.

U.S. Department of Labor Urges Employers and Workers to Keep an Eye out for Hazards following Hurricane Nicholas

Unsafe work conditions due to a southern hurricane call for extra safety precautions.

Setting the Example: ASSP’s Road to Safety 2021

Editor Sydny Shepard sits down with ASSP to talk about the long journey to planning for ASSP Safety 2021.

Well-Being: What Does It Have to Do With Safety?

Panelists explains how well-being and safety collide in a Plenary Session at Safety 2021 in Austin, Texas.

Live From ASSP Safety 2021 Day 2

Companies were back at it Tuesday, showing their products for day two. None of the vendors held back on demonstrations and engaging with others who came to their booths to glance or learn more.

Communication: the Key to Unlocking Safety

Communication is more complex than just talking to one another, especially when it comes to staying safe.

Repeat Exposure Hazard Violations by a Stone Manufacturer Leads to Citations by the U.S. Department of Labor

Repeat Exposure Hazard Violations by a Stone Manufacturer Leads to Citations by the U.S. Department of Labor

Sims Lohman is cited for repeatedly exposing workers to machine hazards, facing more than $200K in fines.

First Impressions: ASSP Safety 2021 Experience

After working for OH&S magazine for about six months, I’ve learned a lot about the safety and health industry through researching, reading, writing and editing. Now, I got to have my first hands-on experience at the ASSP Safety 2021 conference in Austin, Texas

Live From ASSP Safety 2021 Day 1

The first day of ASSP Safety 2021 went off without a hitch.

Rounding Up Safety Professionals for ASSP’s Safety 2021

The American Society of Safety Professional’s kicked off their first in person conference and exposition since the beginning of the COVID-19 pandemic on Sept. 13 in Austin, Texas.

Product Showcase

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • SECUPRO MARTEGO

    FOR HIGHEST DEMANDS. A cutting tool in which function and design go hand in hand. Meet the SECUPRO MARTEGO, our prize-winning squeeze-grip safety knife with fully automatic retractable blade for safety. • Ergonomically friendly trigger mechanism to engage the blade • Durable body made of aluminum • Safer alternative to fixed blade utility knives for general cutting tasks • 9 mm Cutting depth • Easy, tool free blade change Dimensions: L 6.10" L x 0.71" W x 1.91" H Weight: 3.70 oz Cutting Depth: 9 mm Read More

  • The MGC Simple Plus

    The MGC Simple Plus is a simple-to-use, portable multi gas detector that runs continuously for three years without being recharged or routinely calibrated after its initial charge and calibration during manufacturing. The detector reliably tests a worksite’s atmosphere for hydrogen sulfide, carbon monoxide, oxygen and combustible gases (LEL). Its durability enables the detector to withstand the harshest treatment and environments, hence earning it an IP 68 rating. The MGC Simple Plus is also compatible with a variety of accessories, such as the GCT External Pump. Visit gascliptech.com for more information. Read More

Featured

Artificial Intelligence