Articles


NIOSH Finds Practical Solution to Hazardous Dust

The low-cost solution is intended to be used when cutting fiber-cement siding.

FTA Proposes Rule to Improve Safety of Transit Buses

This rule would require that new buses meet minimum thresholds in structural integrity, safety, maintainability, reliability, fuel economy, emissions, noise, and performance.

NRC Blog Explains Value of Scale Model Cask Testing

Bernard White, senior project manager in the Division of Spent Fuel Storage and Transportation, says practicality, not cost, is the main reason to use it.

NSC Survey: Nearly Half of Americans Using Opioid Painkillers Unaware

Drug overdoses, largely from opioid painkillers, are a leading cause of unintentional injury deaths for American adults. This "epidemic" is a primary focus of National Safety Month, according to the council.

3M Acquiring Capital Safety for $2.5 Billion

The announcement says Bloomington, Minn-based Capital Safety's sales have increased at a compound annual growth rate of 10 percent over the past four years.

Poultry Processing Plant Exposed Workers to Musculoskeletal Injuries: OSHA

OSHA has proposed $38,000 in fines for Allen Harim Foods LLC.

The ninth meeting of WHO

Assessing the Threat of MERS

WHO's Emergency Committee held its ninth meeting on June 16, by teleconference, in response to the outbreak in the Republic of Korea.

Lumber Company Fined After Fatal Injury

It said the company was fined $6,600 for not safeguarding exposed shafts in four locations, including the conveyor where Busha died; and $8,400 for a serious-repeat violation of not ensuring that bench grinders were guarded to prevent severe injuries to the hand and face.



All VINs Affected by Takata Recalls Now Searchable

This recall involves 11 different vehicle makes and roughly 34 million vehicles, according to NHTSA.

UK Court Fines Recycling Firm After Amputation

A worker was seriously injured when his arm became trapped in a conveyor belt he was maintaining.

Confined Space Update Offered at NFPA Conference

The June 22-25 conference at Chicago's McCormick Place will include a presentation on the pending NFPA 350 Guide to Confined Space Entry and Work.

"For the first time, we will host a National Stair Climb where anyone can be a hero to the survivors of all of the nation’s fallen firefighters," said Ronald J. Siarnicki, executive director of the National Fallen Firefighters Foundation.

National Stair Climb to Honor All U.S. Fallen Firefighters

The inaugural event is set for Oct. 10, 2015.

Australia's Civil Aviation Authority Wins Top Award

Safe Work Australia presented its Work Health and Safety Reporting Award to the agency during a ceremony in Melbourne.

The amendment by ICAO also prohibits recharging the devices in aircraft cabins. It took effect June 15, 2015.

ICAO Bans E-Cigarettes in Checked Baggage

The amendment to the 2015-2016 edition of its Technical Instructions for the Safe Transport of Dangerous Goods by Air also prohibits recharging the devices in aircraft cabins.

OSHA Determines Open-Flame Heater Likely Cause of Coalgate Fire

The oil rig fire resulted in three deaths and two serious injuries.

Baltimore Staffing Agency Harassed and Discriminated Against Hispanic Employees

The staffing agency also allowed assault and abuse of those employees, according to the U.S. Department of Labor.

Don

Most Distracted Walking Injuries Occur at Home

A National Safety Council report with some surprising stats says distracted walking injuries are increasing.

Washington Metro Ordered to Fix Deficiencies

"These are serious findings that strongly indicate that, despite gains made since the Fort Totten accident, WMATA's safety program is inadequate," said U.S. Secretary of Transportation Anthony Foxx.

Cal/OSHA Issues High Heat Advisory

Citing National Weather Service forecasts, the agency on June 15 advised all employers to protect their outdoor workers from the risks associated with heat illness.

Product Showcase

  • Magid® D-ROC® GPD412 21G Ultra-Thin Polyurethane Palm Coated Work Gloves

    Magid’s 21G line is more than just a 21-gauge glove, it’s a revolutionary knitting technology paired with an advanced selection of innovative fibers to create the ultimate in lightweight cut protection. The latest offering in our 21G line provides ANSI A4 cut resistance with unparalleled dexterity and extreme comfort that no other 21-gauge glove on the market can offer! Read More

  • Safety Knives

    The Safety Knife Company has developed a quality range of safety knives for all industries. Designed so that fingers cannot get to the blades, these knives will safely cut through cardboard, tape, strapping, shrink or plastic wrap or a variety of other packing materials. Because these knives have no exposed blades and only cut cardboard deep, they will not only protect employees against lacerations but they will also save product. The Metal Detectable versions have revolutionary metal detectable polypropylene knife bodies specifically for the food and pharmaceutical industries. This material can be detected and rejected by typical detection machines and is X-ray visible. Read More

  • Glove Guard® Clip

    Safety should never be compromised, especially when it comes to proper glove usage. The Glove Guard® clip enhances safety by encouraging employees to keep their gloves with them at all times. This reduces the risk of accidents and injuries on the job. By ensuring everyone has their gloves readily available, we help promote a culture of safety and efficiency. The Glove Guard® clip is designed to withstand the toughest work environments. Constructed from robust materials made in the USA, it can endure extreme conditions, including harsh weather, and rigorous activities. Read More

Featured

Artificial Intelligence

Webinars